Roberts Radio RD-10 manual Manual Tuning - DAB, Signal strength display - DAB

Page 10
Manual Tuning - DAB

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III channels. UK DAB stations located in the range 11B to 12D.

1. Press and hold in the Tuning control until the display shows

1

"Manual tune".

2.Rotate the Tuning control to select the required DAB channel.

3.Press and release the Tuning control to select the channel.

4.Rotate the Tuning control to select the stations contained within the Multiplex (group of stations) for the selected DAB channel.

5.Press and release the Tuning control to return to normal tuning mode.

Signal strength display - DAB

1.Repeatedly press and release the Info button until the lower line of the display shows signal strength.

2.Position your radio and carefully angle the telescopic aerial for best reception using the signal strength display as a guide. Move your radio around and position so as to give maximum number of black rectangles on signal strength display.

3.The clear unfilled rectangle indicates minimum signal level required for satisfactory reception.

1

9

Image 10
Contents FM RDS/DAB digital radio RD-10Sound for Generations Please read this manual before useContents 16-17Power button ControlsVolume control Tuning controlControls Rear 10. DC in socket 11. Line output socketBattery operation Using the AC adaptorOperating your radio - DAB Selecting a station - DAB Secondary services - DAB Display modes - DABFinding new stations - DAB Autoselect - DABManual Tuning - DAB Signal strength display - DABOperating your radio - FM Manual tuning - FM Display modes - FM FM Stereo/MonoSystem reset Headphone socket Display backlightGeneral SpecificationsCircuit Features Power RequirementsIf you need any further advice, please call our Technical Helpline on 020 8758 0338 Mon-FriPage Guarantee 97-99 Worton Road Isleworth Middlesex TW7 6EG ROBERTS RADIO TECHNICAL SERVICESIssue Technical Helpline - 020 8758 0338 Mon-Fri during office hours