Vulcan-Hart MGG24 operation manual Operation, Controls, Before First USE, Lighting Instructions

Page 8

OPERATION

WARNING: THE GRIDDLE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE GRIDDLE.

CONTROLS

THERMOSTAT — Each thermostat controls the gas flow to the burner to bring that area of the griddle plate up to the set temperature.

BEFORE FIRST USE

The griddle is shipped covered with a protective coating of grease. Remove this film only when the griddle plate is being cleaned prior to its first cooking use. Use a non-corrosive, grease dissolving commercial cleaner, following manufacturer's directions. Rinse thoroughly and wipe dry with a soft clean cloth. Clean all accessories. Rinse thoroughly and wipe dry.

Season the griddle to avoid possible surface corrosion. Heat griddle to a low (300-350°F) temperature and pour on a small amount of cooking oil (about one ounce per square foot of surface). Use a soft lint-free cloth to spread the oil over the entire griddle surface to create a thin film. Wipe off any excess oil with a cloth. Repeat the procedure two to three times until the griddle has a slick, mirror-like surface. This should also be done after every cleaning.

LIGHTING INSTRUCTIONS

Lighting instructions are also inside the front panel. To open the front panel, remove two screws from upper front panel. Lift the upper front panel until it clears the lower front panel.

To reinstall the upper front panel, place panel above lower front panel, slip upper panel down so it engages the lower front panel and install screws.

1.Turn manual shutoff valve OFF.

2.Turn thermostat to OFF. Wait five minutes to allow gas which may have accumulated in the burner compartment to escape.

3.Turn manual shutoff valve ON.

4.Depress and hold in on the red button (Fig. 1) on the automatic pilot shutoff valve while lighting the pilot burner with a lit taper.

5.When gas at pilot has been burning for about 45 seconds, release the red button. If pilot does not remain lit, repeat Steps 1 through 4, allowing more time before releasing red reset button.

— 8 —

Image 8
Contents Installation Important for Your Safety For Your SafetyTable of Contents Location InstallationUnpacking Installation Codes and Standards AssemblyUnited States of America CanadaTesting the GAS Supply System GAS ConnectionsFlue Connections Electrical ConnectionsPage Operation ControlsBefore First USE Lighting InstructionsExtended Shutdown Using the GriddleTurning the Griddle on and OFF Cleaning After Each UseOnce a Day Once a WeekMaintenance Troubleshooting Problem Possible Causes

MGG24 specifications

The Vulcan-Hart MGG24 is a highly regarded commercial-grade gas griddle that meets the demands of restaurants, cafes, and institutional kitchens. Known for its exceptional performance, durability, and versatility, the MGG24 is engineered to withstand high-volume cooking while delivering consistent results.

One of the standout features of the MGG24 is its robust construction. Built from stainless steel, the griddle not only offers a sleek and professional appearance but is also resistant to corrosion and staining, ensuring longevity in a busy kitchen environment. The cooking surface measures 24 inches wide, providing ample space for cooking a variety of foods simultaneously.

The MGG24 employs powerful, U-shaped burners that guarantee even heat distribution across the surface. These burners can deliver up to 30,000 BTUs of cooking power, which is essential for achieving high temperatures quickly. This allows chefs to cook everything from pancakes and eggs to grilled sandwiches and meats with precision. The griddle's quick recovery time is also a significant advantage, as it ensures that the temperature remains consistent, even when large quantities of food are added.

Another innovative feature is the built-in grease trough, which effectively collects excess grease and debris. This design promotes cleanliness and safety in the kitchen, reducing the risk of flare-ups and making cleanup simpler. The griddle also comes equipped with easy-to-use controls, allowing chefs to adjust the temperature with precision to suit different cooking requirements.

Safety is a priority in the MGG24 design; it includes pilot lights for each burner, ensuring reliable ignition and reducing the risk of gas leaks. Additionally, the unit is designed with ergonomic considerations, providing ease of access for maintenance and cleaning.

The Vulcan-Hart MGG24 is designed not just for functionality but also for efficiency. It operates on natural gas or propane, making it adaptable to various kitchen setups. With its advanced technologies, robust features, and emphasis on user-friendly operation, the Vulcan-Hart MGG24 stands out as an essential piece of equipment that enhances productivity in any professional kitchen. Its combination of power, efficiency, and ease of maintenance makes it a reliable choice for chefs who demand the best in their culinary endeavors.