Scotsman Ice AFE325 specifications Maintenance Air Cooled Condenser, Bearings

Page 14

AFE325

Maintenance: Air Cooled Condenser, Bearings

1. Disconnect electrical power.

Electrical Shock Hazard

Disconnect electrical power before beginning.

2.Remove front louvered panel

3.Wipe the lint off the front of the condenser. If needed, clean the interior of the condenser.

4.Use pressurized air to blow the lint from the inside of the condenser. A vacuum cleaner hose should pick up most of the dust. Check for interior dirt. If needed, use coil cleaner to de-grease the condenser.

5.Replace all panels and reconnect electrical power.

Auger and Bearing Inspection

While in most areas regular in-place cleaning with Scotsman Ice Machine Cleaner will be adequate to keep the interior of the evaporator free of excessive mineral build up, some water conditions may require more intense methods. In addition, the auger bearings require physical inspection to determine that they are not wearing. This physical inspection is recommended twice per year for the top bearing and once per year for the auger and both bearings.

Whenever the auger is removed, replacement of the water seal is recommended.

If a bearing requires replacement, the other bearing must also be replaced.

1.Unplug or disconnect electrical power.

2.Shut off the water supply.

3.Remove top panel.

4.Remove right side panel.

5.Drain the evaporator and reservoir.

6.Remove the two screws from the spout at the side of the evaporator.

7Remove screw holding spout plate to evaporator.

8.Remove spout.

9.Pull up on the pull ring to remove the auger. If it is difficult to pull:

A.Remove the breaker cover by taking the snap ring out.

B.Unscrew the auger bolt.

C.Use threaded rod or a slide hammer puller and screw into the auger, slide the weight up against the stop to remove the auger.

If the auger still will not move, bearing replacement is mandatory. See Bearing Removal and Replacement.

August 1994

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents AFE325 AFE325 Product ManualSpecifications To The Installer AFE325 This unit must be grounded For The ElectricianFollow All Local, State & National Codes Final Check List & Initial Start Up Initial Start UpUser Operation Component Location Control Box System Characteristics Refrigeration System OperationWater System Operation Mechanical Operation Electrical SequenceWater System MaintenanceIcemaking System In place cleaning Schedule & ResponsibilityElectrical Shock Hazard Maintenance and CleaningTo Inspect The Top Bearing To Inspect the AugerMaintenance Air Cooled Condenser, Bearings Coupling Maintenance Component InspectionTo replace the water seal Service Diagnosis AFE325 Bearings, Water Seal and Auger Removal and ReplacementReplacement Water Seal & Bottom Bearing Replacement EvaporatorHFC type drier must be used Service RecommendationsRefrigeration System Gear Reducer Removal Gear Reducer Rebuild Gear Reducer

AFE325 specifications

The Scotsman Ice AFE325 is a commercial-grade ice machine renowned for its efficiency, reliability, and innovative design, making it a popular choice among businesses in the foodservice and hospitality industries. This machine is designed to produce a high volume of ice quickly, ensuring that users can meet their demands during peak hours without compromising on quality.

One of the notable features of the AFE325 is its advanced ice-making technology, which allows it to produce an impressive amount of ice—up to 350 pounds per day. The machine utilizes a highly efficient refrigeration system that enhances its performance while keeping energy consumption to a minimum. This efficiency not only reduces operational costs but also supports sustainable practices, which is increasingly important in today’s environmentally conscious market.

The AFE325 incorporates a user-friendly control panel that simplifies operation, allowing users to easily monitor and adjust settings as needed. This feature is particularly beneficial in high-demand environments where quick adjustments can contribute to better service. Additionally, the machine is designed for easy cleaning and maintenance, featuring a removable door and internal components that facilitate access for regular servicing. This feature ensures that hygiene standards are upheld, which is crucial in food-related businesses.

Moreover, the Scotsman AFE325 is built with robust construction materials designed to withstand the rigors of commercial use. Its stainless steel exterior not only provides durability but also gives the machine a professional appearance, blending seamlessly into various kitchen environments.

The ice produced by the AFE325 is of high quality, with a clean, clear finish that is ideal for drinks, food preservation, and display. The ice machine is equipped with advanced controls that ensure consistent ice size and shape, further enhancing its usability across different applications.

In terms of safety, the AFE325 includes built-in safety features to prevent overheating and other potential operational hazards. This attention to safety allows users to operate the machine with confidence, knowing that it meets industry standards.

Overall, the Scotsman Ice AFE325 is an exemplary ice machine that combines cutting-edge technology with practical design. Its efficiency, reliability, and user-friendly features make it an excellent investment for any business looking to provide high-quality ice while maintaining operational effectiveness.
Top Page Image Contents