Vulcan-Hart F-37418 Top Section Burner French/Hot Top/Griddle, Char Broiler Top Burner Removal

Page 20

8.Reverse the procedure to install the top section burner.

9.Test the oven to verify proper operation.

Figure 22: Char Broiler Top Burner Removal

Top Section Burner (French/Hot Top/Griddle)

WARNING: Always perform the Electrical Lockout/Tagout procedure before removing any sheet metal panels or attempting to service this equipment. Failure to comply with this procedure can cause property damage, injury or death.

WARNING: Perform the GAS LOCKOUT/TAGOUT procedure before servicing the unit.

1.Perform the MANIFOLD COVER removal procedure.

2.Remove the burner top plate.

3.Remove the burner head.

4.Remove the burner plate(s).

5.Tag and remove the burner insulation.

6.Remove the gas flex lines to the burners.

7.Remove the two (2) screws securing the burner nozzle mount bracket.

8.Remove the burner nozzle bracket and burner nozzles.

9.Remove the outer burner ring.

10.Remove the middle burner ring.

11.Remove the inner burner ring.

12.Remove any residual tape from the fittings and coat the threads with new gas-rated (yellow) Teflon tape.

WARNING: All gas joints disturbed during servicing must be checked for leaks. Do not use an open flame. Use a hazardous gas tester or a soap and water solution (Bubbles indicate a gas leak). Failure to comply can cause property damage, injury or death.

13.Reverse the procedure to install the top section burner.

14.Test the oven to verify proper operation.

Figure 23: French/Hot/Griddle Top Burner Removal

Page 20 of 36

Image 20
Contents Series HDR GAS Ranges Important for Your Safety Table of Contents Electrical Operation Installation Operation Cleaning Lubrication GeneralRemoval and Replacement of Parts Manifold Cover All Models GAS LOCKOUT/TAGOUTKick Panel All Models Manifold Cover RemovalOven Control Panel S Model Oven Control Panel C ModelPilot Safety Valve and Temperature Control Assembly S Model Page Temperature Control C Model Model Pilot Safety Valve RemovalModel Temperature Control Removal Pilot Safety Valve C Model Solenoid C ModelManual Gas Shut-Off Valve C Model Oven Pilot Assembly Model Shut-Off Valve RemovalOven Burner Assembly Oven Burner Nozzle and Gas OrificePilot Quick Disconnect Valve Top Section Burner Open TopTop Section Burner Char Broiler Open Top Burner RemovalTop Section Burner French/Hot Top/Griddle Char Broiler Top Burner RemovalConvection Motor Fan Control Switch C Model Top Section Burner Control ValveConvection Motor Fan Control Switch Removal Convection Motor C ModelService Procedure and Adjustments Oven Door Microswitch C ModelGas Leak Check Gas Pressure CheckGas Pressure Regulator Adjustment Oven Pilot Flame Check and Adjustment Pilot Flame AdjustmentIf the flame is soft, lazy, or yellow Air Shutter AdjustmentOven Burner Nozzle and Gas Orifice Check If the flame is lifting off the burner Top Burner AdjustmentOven Burner Adjustment Oven Door Microswitch Test C Model Fan Control Switch Test C ModelConvection Motor Test C Model Convection Motor Test Solenoid Test C ModelConvection Oven Solenoid Test Component Function Power Cord Oven Door MicroswitchFan Control Switch Convection Oven SolenoidSequence of Operation C Model Wiring Diagrams Troubleshooting Condensed Spare Parts List

F-37418 specifications

The Vulcan-Hart F-37418 is a prominent model in the realm of commercial cooking equipment, specifically designed to meet the rigorous demands of busy kitchens. Built by Vulcan-Hart, a leader in the food service equipment industry, this range combines reliability, efficiency, and innovative technology to provide an exceptional cooking experience.

One of the key features of the F-37418 is its durable construction. The stainless steel exterior is not only aesthetically pleasing but also designed for longevity and ease of cleaning. The solid build resists corrosion and can withstand the daily wear and tear typical in high-volume cooking environments.

At the heart of the F-37418 is its powerful heating system. Equipped with advanced burner technology, this unit promises rapid heating and precise temperature control. The high-output burners are designed to deliver consistent performance, allowing chefs to achieve perfectly cooked dishes with minimal effort. With multiple burners available, the F-37418 provides ample cooking space, enabling users to prepare multiple dishes simultaneously.

Another standout feature is the intuitive control panel. The Vulcan-Hart F-37418 offers straightforward controls that ensure ease of operation, even during peak cooking times. The control knobs are clearly labeled and provide immediate feedback, allowing chefs to make quick adjustments to temperature and cooking times as needed.

In terms of versatility, the F-37418 excels with its range of options, including griddles, broilers, and ovens. This flexibility ensures that the equipment can be adapted to various cooking styles and menus, from breakfasts to gourmet dinners, and everything in-between.

Safety is also a priority in the design of the Vulcan-Hart F-37418. The unit is equipped with safety features such as ignition control systems and flame failure protection, which help to ensure safe operation in the kitchen.

Furthermore, the F-37418 has been designed with energy efficiency in mind. It not only reduces energy consumption but also helps in lowering operating costs, a crucial factor for any restaurant or commercial kitchen.

With all these features combined, the Vulcan-Hart F-37418 stands as a reliable and powerful cooking solution. It is well-suited for restaurant kitchens, catering services, and other food service applications, promising performance that meets the high standards of chefs and food service operators alike. This model exemplifies Vulcan-Hart's commitment to quality, innovation, and customer satisfaction, making it a preferred choice in the culinary world.