Sears 45521, 45520 warranty Removable Oven Racks, Removable Oven Door

Page 16

REMOVABLE OVEN DOOR

To rentove:

1.Open the door to the atop position (see Illustration).

2.Grasp the door at each side and lift up and off the hinges. Do not lift door by the handle. Glass break- age or damage to the door could result.

NOTE: When the door is removed and hinge arms are at stop posiUon, do not bump or try to move the hinge arms. The hinges could snap back causing an injury to the hands or damage to the porcelain on the front of the range. Cover the hinges with toweling or empty towel rolls while working in the oven area.

To replace:

1.Hold the door over the hinges with the slots at the bottom edge of the door lined up with the hinges.

The hinge arms must still be in the stop position.

2.Slide the door down onto the hinges as far as It will go and close the door.

STOP (BR_L)POSmON

HINGI

STOP POSITION

REMOVABLE OVEN RACKS

Be careful not to scratch the oven flnleh when Installing or removing oven racks.

To install:

BUMP

GUIDE

1.Set the raised back edge of the rack on a pair of rack guides,

2.Push the rack In until you reach the bump in the rack guide, then lift the front of the rack a bit and push the rack all the way In.

To remove:

1.Pull the oven rack out, then up, in one motion. See the cleaning chert.

Note: For best performance remove oven racks during a clean cycle. If oven racks ere left in the range during a clean cycle, they will darken, lose their luster and become hard to slide. If you choose to leave the racks in the oven, you can polish the edges of the racks with steel wool and apply a small amount of vegetable oil to the rack

edges after the self-clean cycle. This wgl make the racks easier to slide.

Note= The racks are designed with stop locks.

When the racks are placed correctly on the rack support and extended from the oven the stop locks prevent the racks from tilting when removing foods from them or placing foods on thorn.

15

NEMNT71-1

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Contents SafetyImportant Instructions for Your Safety Iii!i! !i!i!ii Important Safety Instructions Important Safety Instructions Important Safety NoticeOven Fire Cooktop Grease FireYour Range Cooktopcooking Cooktop ControlHome Canning Tips AnswersObserve Following Points Canning RightwrongTo Cancel the Timer To SET the TimerRange Control Delayed on and OFF To Reset BroilTo SET Broil Timed BakingOven Cooking DisplayTones CodePositioning Broiler PAN BroilingBroiling Tips Before a Clean Cycle SELF-CLEAN CycleAfter a Clean Cycle To SET SELF-CLEAN Cycle Cleaning TipsWhen a Clean Cycle is Finished To SET Delayed SELF-CLEAN CycleBrushed chrome cooktop Removable Oven Racks Removable Oven DoorRemovable Knobs Removable Cooktop UnitsLIFT-UP Cooktop Replacing the Oven LightGlass Before Calling for Service Dont Call for ServiceProblem Possible Cause Until YOU Check NESER69-2Before Calling for Service Problem Possible CauseDont Call for Service Until YOU Check CLEAR/OFFDO-IT-YOURSELFOVEN Temperature Adjustment Page Page Full 90-DAY Warranty on Mechanical Adjustments WE Service What WE SellParts Except Glass Parts
Related manuals
Manual 24 pages 60.04 Kb

45520, 45521 specifications

Sears models 45521 and 45520 are notable entries within the catalog of tools and equipment that target both enthusiasts and professional tradespeople alike. These models have garnered attention for their blend of practicality, durability, and innovative features.

The Sears 45521 is designed with a focus on precision and versatility. One of its standout features is the adjustable speed settings, allowing users to tailor the performance to suit different applications. Whether it is for drilling, sanding, or cutting, this model provides the flexibility needed to tackle a variety of tasks.

On the other hand, the Sears 45520 emphasizes its powerful motor, which enables it to handle more demanding tasks with ease. The robust construction of this tool not only promises longevity but also reduces the risk of wear and tear over time. The ergonomic design ensures user comfort, reducing fatigue during extended use.

Both models are equipped with advanced safety features that protect users while they work. These include protective guards and overload protection, which help prevent accidents and ensure reliable operation.

In terms of technology, Sears has integrated some modern advancements into the 45521 and 45520 models. For example, both feature an easy-to-read digital display that provides real-time feedback on performance metrics, including speed and power usage. This level of precision allows users to make informed adjustments and optimize their workflow.

Another characteristic shared by these models is their compatibility with a wide range of accessories. This includes drill bits, blades, and sanding attachments, making them highly adaptable tools that can meet various project needs. Furthermore, both models come with comprehensive user manuals, providing detailed guidance on setup, operation, and maintenance, which enhances their usability for individuals at all skill levels.

In summary, the Sears 45521 and 45520 models offer a combination of versatility, power, and safety, making them excellent choices for DIY enthusiasts and professionals alike. With their advanced features and robust design, they stand as reliable tools that can handle a diverse array of tasks in various settings.
Top Page Image Contents