Sears 45520, 45521 warranty Removable Knobs, Removable Cooktop Units

Page 17

REMOVABLE KNOBS

All control knobs may be removed for easy cleanlng by pulllng the knob stralght off the stem. Be sum that the knob Is In the OFF positlon before removal.

Hint: Slip a thin cloth (such as a handkerchief) or a piece of string under and around the knob edge and pull up.

Caution: Read these instrucUons

carefully before replacing the knobs. Replacing the knobs improp- erly will damage the knobs and the spring clip on the stems. If this happens, the knobs will fit loosely.

To replace the knob:

1.The knob stem has a groove In each side. The groove on one side has a spring clip. The other groove Is clear (see Illustration).

2.Check the Inside of the knob and find the molded rib.

3.Replace the knob by fltUng the molded rib Inside the knob Into the clear groove on the stem.

MOLDED

RIB

. SPRING

_CLIP

CLEAR GROOVE

IN STEM

Note: Be sure to replace knobs on correct

stems from which they came.

REMOVABLE COOKTOP UNITS

The cooktop elements can be unplugged and the bowls removed for cleaning.

Be sure all cooktop unit control knobs are turned off and elements are cool before you remove or replace a cooktop unit.

To remove:

1.Grasp element, tilt It upward slightly to clear the bowl, then pull away from the receptacle. The element will not sit level when replaced If It Is forced too far upward when removed.

2.For medelswlth porcelain enameled refleotor bewls, remove the chrome trim ring.

3.Lift out the bowl.

Do not put the element Into water. It cleans Itself when heated during normal use.

To replace:

1.Replace the bowh Be sure the receptacle Is showing in the bowl opening.

2.For mndelswlth porcelain enameled refleotor bewls, replace chrome trim ring.

3.Slide the plug ofthe element firmly Into the receptacle and lower the element into place.

IMPORTANT: Never operate a cooktop element

without the bowl in place. This can cause

scorching of the eooktop, burning of wiring insulation and loss of energy.

CAUTION: Do not pull element up mere than

(" or damage to the receptacle will

Occur,

16

NEMNT37

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Safety ContentsImportant Instructions for Your Safety Iii!i! !i!i!ii Important Safety Instructions Important Safety Notice Important Safety InstructionsOven Fire Cooktop Grease FireYour Range Cooktop Control CooktopcookingAnswers Home Canning TipsObserve Following Points Canning RightwrongRange Control To SET the TimerTo Cancel the Timer To Reset Broil Delayed on and OFFTo SET Broil Timed BakingDisplay Oven CookingTones CodeBroiling Tips BroilingPositioning Broiler PAN After a Clean Cycle SELF-CLEAN CycleBefore a Clean Cycle Cleaning Tips To SET SELF-CLEAN CycleWhen a Clean Cycle is Finished To SET Delayed SELF-CLEAN CycleBrushed chrome cooktop Removable Oven Door Removable Oven RacksRemovable Cooktop Units Removable KnobsGlass Replacing the Oven LightLIFT-UP Cooktop Dont Call for Service Before Calling for ServiceProblem Possible Cause Until YOU Check NESER69-2Problem Possible Cause Before Calling for ServiceDont Call for Service Until YOU Check CLEAR/OFFDO-IT-YOURSELFOVEN Temperature Adjustment Page Page Parts Except Glass Parts WE Service What WE SellFull 90-DAY Warranty on Mechanical Adjustments
Related manuals
Manual 24 pages 60.04 Kb

45520, 45521 specifications

Sears models 45521 and 45520 are notable entries within the catalog of tools and equipment that target both enthusiasts and professional tradespeople alike. These models have garnered attention for their blend of practicality, durability, and innovative features.

The Sears 45521 is designed with a focus on precision and versatility. One of its standout features is the adjustable speed settings, allowing users to tailor the performance to suit different applications. Whether it is for drilling, sanding, or cutting, this model provides the flexibility needed to tackle a variety of tasks.

On the other hand, the Sears 45520 emphasizes its powerful motor, which enables it to handle more demanding tasks with ease. The robust construction of this tool not only promises longevity but also reduces the risk of wear and tear over time. The ergonomic design ensures user comfort, reducing fatigue during extended use.

Both models are equipped with advanced safety features that protect users while they work. These include protective guards and overload protection, which help prevent accidents and ensure reliable operation.

In terms of technology, Sears has integrated some modern advancements into the 45521 and 45520 models. For example, both feature an easy-to-read digital display that provides real-time feedback on performance metrics, including speed and power usage. This level of precision allows users to make informed adjustments and optimize their workflow.

Another characteristic shared by these models is their compatibility with a wide range of accessories. This includes drill bits, blades, and sanding attachments, making them highly adaptable tools that can meet various project needs. Furthermore, both models come with comprehensive user manuals, providing detailed guidance on setup, operation, and maintenance, which enhances their usability for individuals at all skill levels.

In summary, the Sears 45521 and 45520 models offer a combination of versatility, power, and safety, making them excellent choices for DIY enthusiasts and professionals alike. With their advanced features and robust design, they stand as reliable tools that can handle a diverse array of tasks in various settings.
Top Page Image Contents