Oregon Scientific PS-L06 To Disable or Enable Auto Synchronization, SET or Change the Clock

Page 13

TO DISABLE OR ENABLE AUTO-

SYNCHRONIZATION

In Clock mode, Press DOWN for 2 seconds to disable the auto-synchronization. The unit will not respond to radio signals until you reactivate the synchronization.

To enable auto-reception, press UP for 2 seconds.

SET OR CHANGE THE CLOCK

1.Press SELECT to switch to the Clock Mode. The time will flash.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm.

EN

ALARM

When activated, the Melody Alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first 8 seconds.

The Radio alarm turns on the Radio automatically. It will turn off after 2 hours.

SET ALARM

1.Press SELECT several times until the Alarm area flashes.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the hour, minute, and alarm type ( for

Melody Alarm or for Radio Alarm). Press UP or DOWN to change the setting. Press

11

PS-L06_GB-final.p65

13

8/8/03, 12:02 PM

Image 13
Contents Model # PS-L06 / PS-L06U PS-L06GB-final.p65 03, 1202 PM Table of Contents About this Guide TOP View Descriptions Product OverviewLCD Display Button Descriptions Back ViewBottom View Descriptions Remote Unit Getting Started AC Power AdapterBatteries Change Settings Switch Between ModesRemote Unit SET UP InstallationReception ClockAlarm To Disable or Enable Auto SynchronizationSET Alarm SET or Change the ClockSnooze To Turn the Alarm OFF or onCalendar SET DateBarometer Moon PhaseView the Last 24 Hours Barometric TrendSET Unit and Altitude Weather Forecast Temperature and HumidityView MIN / MAX / Current Measurements Clear MIN / MAX MeasurementsSensor Searching Select Remote Unit ChannelTrends Comfort ZoneRadio Headphones Sleep TimerStore Station to Memory BacklightProjector Project Time / Alarm StatusFlip Image Rotate ImageSafety and Care Reset SystemContinuous Projection Problem Symptom Remedy TroubleshootingProjector Specifications Barometer Radio Additional Resources PowerEC-DECLARATION of Conformity