Sears 911. 62048, 911. 62078, 911. 62071 Cleaning Materials, Door by the Handle, To Replace

REMOVABLEPARTScontinued

CLEANING MATERIALS

• Dishwashing detergent

•Warm water

•Scouring pad or soap-filled steel wool pad

RAISED BACK

OF THE RACK

TO REMOVE:

1.Pull the racks out to the stop lock position.

2.Pull up the front of the rack and slide under the bump of the rack guide.

TO CLEAN:

Clean with warm water and detergent. For hard to remove stains, gently scrub with a scouring pad or a soap-filled steel wool pad. Rinse well.

TO REPLACE:

1.Place the raised back of the rack onto the rack guides.

2.Lift the front of the rack until the raised back slides under the bump of the rack guides.

3.Slide the rack all the way back.

BROIL STOP POSITON / _/<j/_

TO REMOVE:

1.Open the door to the broil stop position.

2.Grasp the door at each side and lift up and off the hinges. DO NOT LIFT

DOOR BY THE HANDLE.

CAUTION: When the door is

are at the broil stop position,

_removed and the hinge arms

as a precaution, cover the hinge arms with toweling or an !

empty paper towel roll. Do not bump or try to move the hinge arms while working in the oven area. They could snap back causing injury to the hands or damage the porcelain finish of the front frame.

TO REPLACE:

1.Make sure the hinge arms are in the broil stop position.

2.Lift the door by the sides.

3.Line up the slots at the bottom edge of the door with the hinge arms.

4.Slide the door down onto the hinge arms as far as it will go.

5.Close the door.

14 removable parts continued