Sears 46725, 46729 manual When a Clean Cycle $, Increase or Decrease Clean Time, NCSCL07

TO SET SELF=CLEAN CYCLE:

1.Close oven door. The door locks automatically after control Is set.

2.Push CLEAN. The time display will show (.... ). See Fig, to

Fig. 1 (_)

3.Press the UP or DOWN arrow pad to set the desired length of clean time. Clean time Is normally 3 hours. You can change tt between 2 and 4 hours, depending on how dirty the oven is. See Fig. 2o

INCREASE OR DECREASE

TO _NTERRUPT A CLEAN CYCLE:

1.Push CLEAR.

Follow instructions under "WHEN A CLEAN CYCLE HS FiNiSHED".

TO SET DELAYED SELF-CLEAN

CYCLE:

Follow steps 1-3 under "TO SET SELF.CLEAN CYCLE", THEH:

4.Press STOP TIME=

5.Set the time of day when you want the clean cycle to end. See Fig= 4=

The control will calculate the start clean time.

INCREASE OR DECREASE

CLEAN TIME

SET TIME OF DAY YOU

WANT CLEAN CYCLE TO END

Fig. 2

CLEAN TIME

You can push STOP TIMS to find out when the cycle will end. Push CLEAN to return to countdown.

WHEN A CLEAN CYCLE _$

FmHflSHED:

1.Wait untll the LOCK display goes out. Allow 30 minutes for oven to cool. The oven temperature must

drop to a safe level before the door can be opened. See Fig, 3.

(_)WAIT UNTIL LOCK GOES OUT

Fig° 3

Note:When selecting a stop time for a

delayed clean cycne, you must allow time for the 2.4 hour clean t_nte,

"Door" will flash in display if you forget to lock the door.

NOTE:Your oven light should be OFF during a self-clean cycle to prolong the life of the bulb.

I4 NCSCL07