Sears 46725, 46729 manual Bump Rack Guide, Stop Broil Position

R MOVABLE OVEN RACKS

Be carefuU not to scratch the oven finish when installing or removing oven racks.

To instaU:

1.Set the raised back edge of the rack on a pair of rack guides.

2.Push the rack in until you reach the bump In the rack guide, then lift the front of the rack and push the rack all the way In.

To remove_ =

1. Pull the oven rack out, then up.

Some models have one standard oven rack and one folding oven rack.

The folding rack can be easily stored away when not In

use.

NOT_: For best pe_omtance_ remove oven racks during a clea- cycBe. Jf oven racks are _eft in the range dudng a seN-cDean c¥cRe, they will darken, lose their luster and become hard to slide= H you choose to aeave the racks in the oven, you can polish 1the edges of the racks with steel wood and apply a smi! amount of vegetable oig to the rack edges after the self-c_ean cycle.

BUMP

IN RACK

GUIDE_

RE,lOVABLE OVI N DOOR

To remove:

,Open the door to the stop position (see illustration).

2_ Grasp the door at each side and Sift up and off the hinges.

NOTE: When the doo_" is removed and hinge arms are at stop position, do not bump or try to remove the hinge arms. The hinges could snap back causing an injury to the

hands or damage to the porcelain on the

fro,t of the range= Cover the hinges with

toweling or empty rowe! roils while working in the over, area.

To replace:

1.Hold the door over the hinges with the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.

2.Slide the door down onto the hinges as far as it will go and close the door,

STOP (BROIL) POSITION

16 NCMNT02