Onkyo Using the RC-518M Remote Controller for Enhanced AV Component Control

Using the Remote Controller RC-518M with Your Other AV Components

RC-518M

Connecting your -compatible Onkyo CD player, DVD

player, or cassette recorder to the HT-R510 via allows you to control your system with the HT-R510’s remote con- troller by pointing it at the HT-R510. This allows you to con- trol components that are out of sight, for example, in a cabinet. Since you don’t have to enter any special codes, or

do any programming, allows you to control these compo- nents quickly and easily. See page 19 for connection infor- mation. See page 41 for operating information.

In addition, you can control an AV component made by another manufacturer by entering the appropriate manufac- turer’s code into the remote controller.

Note:

•To use the function, you must make an connection and an analog RCA/phono connection between the AV component and your HT-R510, even if they are connected digitally.

Entering the Manufacturer’s Code

If you’re using an Onkyo CD player connected to the

HT-R510’s connector, an Onkyo AV component without

an connection, or an AV component made by another manufacturer, do the following.

1	Determine the appropriate manufacturer’s
	code from the following list.
	Where several codes are listed, try the first one, and
	if that doesn’t work, try the others until you find one
	that does.

2	While holding down the remote controller’s
	[VCR], [TV], [CABLE/SAT], or [CD/DVD] but-
	ton, press the [ENT] button.
	For the [CD/DVD] button, you can enter a CD code
	or DVD code, not both. And for the [CABLE/SAT]
	button, a Cable code or Satellite code, not both.
3	Within 10 seconds, use the remote control-
	ler’s number buttons to enter the manufac-
	turer’s code.
4	Check to see if you can control the AV com-
	ponent from the remote controller.

If it works as expected, the code has been entered correctly. If not, go back to step 3 and try again.

Note that with some manufacturer’s AV components, some of the remote controller’s buttons may not work as expected.

By default, the [CD/DVD] button is set to code 316, which is for use with an -compatible Onkyo DVD player connected to the HT-R510’s connector. To control an -compatible Onkyo CD player connected to the HT-R510’s connector, you must enter code

300.To control an Onkyo DVD player without an connection, you must enter either code 301 or 313. The [CD/DVD] button can be used with only one AV compo- nent.

Manufacturer	TV	VCR	DVD	Cable	Satellite
AIWA		137
AKAI	227
DENON			302
ECHOSTAR					500
EMERSON	228
FISHER	200	100, 101, 102,
		140
GE		103, 104
GE • PANA	201, 202
GE • RCA	203
GEMINI				401
GENERAL					501
INSTRUMENT
G.I.				400
GO VIDEO		105, 106, 107
GOLD STAR	204, 205	108
HAMLIN				402, 403, 404,
				405
HITACHI	206, 207	103, 109	303		502
HUGHES
NETWORK					503
SYSTEM
JERROLD				406, 407, 408,
				409, 410, 411,
				412, 413, 414
JVC	208	110, 111, 112,	304
		113
KENWOOD			305
MACOM				415, 416, 417
MAGNAVOX	209, 210	114, 115, 116	306	418
MARANTZ	211		307
MITSUBISHI		117, 118, 119,	308
		120, 121, 139
NEC		136
OAK				419, 420, 421
			301, 313,
ONKYO			316 (for
			DVD),
			300 (for CD)
PANASONIC	212, 213	122, 123	309	422, 423	504, 505, 506
PHILIPS	214	114		424, 425, 426,
				427, 428, 429
PIONEER	215		310	430, 431
PRIMESTAR					507
PROSCAN	216		311		508, 509, 510
RCA	217, 218, 219,	109	311		508, 509, 510
	220, 229, 230
S.ATLANTA				432, 433, 434
SAMSUNG	221, 222	124, 125, 126	304	435
SHARP	223	127, 128
SHINTOM		138
SONY	224	129, 130, 131,	312		511
		132, 133, 141
TOCOM				436
TOSHIBA		134	313		512
YAMAHA			314
ZENITH	225, 226	135	315	437, 438

40