Style # XSH732, EURO-PRO Operating LLC | Shark EP732F instruction

Style # XSH732

for Model EP732F

1 HEPA Filter

Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust cup, changing or cleaning the HEPA filter or performing maintenance/trouble shooting checks.

Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen

Style # XSH732

for Model EP732F

1 HEPA Filter

Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen

To remove the dust cup container from the vacuum:

1.Lift the dust cup handle and lift the dust cup container out.

2.To remove the Rinseable “TapClean” HEPA dust cup filter from the

dust cup container,	Lock
hold the dust cup	Open
container from the
handle and turn
counter clockwise
to release the dust
cup cover.

3.After you have removed the dust cup cover from the dust cup container, hold the dust cup

handle with one hand and twist the HEPA filter counter clockwise holding it from the filter stem to remove from the dust cup cover.

4.After you have removed the

Rinseable “TapClean” Twist HEPA dust cup filter from the dust cup, separate the debris screen from the HEPA filter cartridge by holding the top rim of the filter and twisting the debris screen counter- clockwise to unlock the debris screen from the filter. Then lift the debris screen to remove.

5.Rinse the debris screen under the faucet with lukewarm water until

clean. Allow to air dry for 24 hours. Do NOT wash in dishwasher.

6.To replace the debris screen onto the filter, slip the debris screen over the filter and twist clockwise to lock in place.

Warning: After each Use - Always remove the Rinseable "TapClean" HEPA Filter from the Dust Cup, then vigorously “TapClean” HEPA Filter until no more dust can be removed.

Important: When "TapCleaning" the HEPA filter, hold the HEPA filter from the stem and tap ONLY the top rim against the side of the waste container. NEVER tap directly on the pleated folds of the HEPA filter.

Stem

Top Rim