Miele KWT1601VI Optimum temperature and air quality, Temperature, Setting the temperature

Page 15

Optimum temperature and air quality

Wine will continue to mature depending on the surrounding conditions. The length of time which wine can be kept in good condition will therefore depend not only on the temperature but also on the air quality.

The wine storage unit provides a constant temperature, increased humidity and an odor-free environment, creating the best possible storage conditions for your wine.

Temperature

Wine can be stored at temperatures between 41°F and 64°F (5 - 18°C). If you would like to store red and white wines together, choose a temperature between 50°F and 54°F (10 - 12 °C). Most white wines are palatable at this temperature. It is best to take red wine out of the appliance about 2 hours before drinking. Open the wine to allow it to breathe and to develop its aroma. After 2 hours, red wine will be at the correct temperature for drinking.

Storage temperatures above 72°F (22°C) will cause wines to mature too quickly. By contrast, wine should not be stored below 41°F (5°C), since it will not mature fully at this low temperature.

Fluctuations in temperature put wine under stress and interrupt the maturing process. Therefore, it is important to maintain a constant temperature.

Setting the temperature

The factory (default) settings for the temperature zones are as follows:

The upper temperature zone is set for optimal red-wine storage:

Red temper 62°F (17°C)

The middle temperature zone is set for optimal white-wine storage:

White temper 46°F (8°C)

The lower temperature zone is intended for wine storage in general.

Wine storage 51°F (11°C)

You can change the "purpose" of the zones as you wish.

For example, you can store white wine in the upper temperature zone, as long as you adjust the temperature accordingly:

^Tap the sensor button for the desired temperature zone, so that it turns yellow.

^Select the preferred temperature setting so that the sensor button turns yellow.

The setting "white temper" is not available in the lower temperature zone.

15

Image 15
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Before using for the first time Before useTurning the appliance On/Off Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Alarm Temperature alarmDoor alarm Optimum temperature and air quality TemperatureSetting the temperature Insulation panels for thermal separation Temperature rangesTemperature display Temperature unit Fahrenheit/Celsius Increasing or decreasing the humidity HumidityAir exchange through the activate charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackDisplay lighting Turning on Duration of the display lightingTurning off Defrosting Cleaning and care Before cleaningCleaning the interior Door seals After cleaningVentilation slits Active charcoal filtersInterior lighting Changing the light bulbsWhat if the temperature is too low? Frequently asked questionsMildew is beginning to form on the wine bottle labels What if the alarm is ringing? Possible fault SolutionWhat if the display lighting is not working? White coating has formed around the wine corksRattling, vibrating Blubb, blubbClick SssrrrrrMieleCare After sales servicePage Installation instructions Caring for the environment Disposal of packing materialsDisposal of an old appliance Installation Installation siteEmpty weight of your machine Ventilation Installation nicheBase Furniture/fixturesSide-by-side Installation optionsAppliances attached together using the Merging Kit Single columnSide panels Adjusting the door opening angle optional accessoryInstallation with partition using the Merging Kit Installation with partition without using the Merging KitKWT 16X1 12 305 mm DimensionsPower supply Door dimensions open minNiche dimensions Dimensions Other Tools needed for installationOptional accessories Before you beginCheck the installation niche Before installation RemoteVision module installation InstallationHome Security System HSS Mounting Accessories Preparing the installation nicheAnti-tip-brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation nicheAlign the custom doors with a level Aligning the applianceAttaching the appliance to the installation niche Installation Preparing the custom door Custom door front Attaching and aligningAttaching the covers Attaching the toe-kick cover Attaching the cover strips Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options Page Alteration rights reserved

KWT1601VI, KWT1611VI specifications

The Miele KWT1611VI and KWT1601VI are two exceptional wine coolers designed for discerning wine enthusiasts who appreciate the art of wine storage. Miele is renowned for its commitment to quality and innovation, and these models exemplify this dedication.

The KWT1611VI boasts a sleek, integrated design that allows it to blend seamlessly into any kitchen or dining area. It features a capacity for up to 38 bottles, making it ideal for wine collectors and casual drinkers alike. It includes two temperature zones, which can be individually adjusted from 41°F to 68°F. This feature ensures optimal storage for both white and red wines, preserving their flavors and aromas.

One of the standout technologies of the KWT1611VI is Miele's Active AirClean filter. This specially designed filter eliminates unwanted odors, creating a perfectly neutral environment for wine storage. Additionally, the KWT1611VI employs vibration dampening technology, which minimizes vibrations that can disturb wine. A quiet, efficient compressor contributes to a stable temperature environment, further enhancing the preservation of wine quality.

On the other hand, the Miele KWT1601VI is slightly smaller, accommodating up to 24 bottles. It similarly features dual temperature zones, allowing users to maintain optimal conditions for different types of wine. Its compact size makes it perfect for those with limited space or who prefer a standalone wine cooler.

Both models feature a sleek, user-friendly control panel, providing convenient access to temperature settings and other options. The innovative LED lighting illuminates the interior without generating heat, ensuring your wine bottles are showcased beautifully while being stored at the correct temperatures.

In addition to their robust functionality, the KWT1611VI and KWT1601VI are constructed with high-quality materials, including stainless steel and UV-resistant glass. This not only enhances the aesthetic appeal of the coolers but also protects wine from harmful UV radiation, which can degrade quality over time.

In summary, the Miele KWT1611VI and KWT1601VI wine coolers are designed with the wine lover in mind. Featuring dual temperature zones, advanced filtration systems, and space-efficient designs, they represent the perfect blend of functionality and aesthetics, making them an ideal choice for anyone looking to enhance their wine storage experience.