Miele KWT1611SF, KWT1601SF installation instructions Alarm, Temperature alarm, Door alarm

Page 14

Alarm

The appliance is equipped with an alarm system, to ensure that the temperature does not rise unnoticed because of energy loss or an open door.

The alarm system is always operational, it does not need to be turned on.

Turning the temperature alarm Off

As soon as the alarm condition is corrected, the alarm signal turns off and the affected zone stops flashing in the display. The "alarm" indicator goes out.

Temperature alarm

If the temperature becomes too warm, an alarm sounds, the "alarm" indicator turns red and flashes. At the same time the affected zone flashes in the display.

If you use the Home Security System, a temperature alarm will also trigger your security alarm. Once the temperature alarm is turned off, the security alarm will also shut off.

The alarm will sound and the display will flash if:

too much warm air flows into the appliance, for example when bottles are being loaded, re-arranged, or taken out.

a large number of bottles are being stored for the first time.

the power fails.

^To turn the alarm off early, press the "alarm" sensor button.

The alarm signal turns off. The "alarm" indicator remains red and the corresponding appliance zone continues to flash until the alarm condition is corrected.

Door alarm

If the appliance door is left open for over 5 minutes, an alarm signal will sound and the "alarm" indicator will light up.

Turning the door alarm Off

Once the door is closed the alarm turns off and the "alarm" indicator goes out. If the door has not been closed properly, the alarm will sound again after five minutes.

^To turn the alarm off early, press the "alarm" sensor button. The "alarm" indicator and signal will turn off.

14

Image 14
Contents En US, CA Contents Contents Important Safety Instructions Electrical safetyInstallation UseSave These Instructions Disposal of your old applianceGuide to the wine storage unit Control panel Turning the appliance On/Off Before using for the first useBefore use Settings Using the settingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Optimum temperature and air qualityTemperature Temperature ranges Insulation panels for thermal separationTemperature display Temperature unit Fahrenheit/Celsius Humidity Increasing or decreasing the humidityAir exchange through the activate charcoal filter Storing wine Storage tipsBottle display rack Maximum capacityTurning off Display lightingTurning on Duration of the display lighting Defrosting Cleaning the interior Cleaning and careBefore cleaning Appliance doorActive charcoal filters After cleaningVentilation slits Door sealsChanging the light bulbs Interior lightingFrequently asked questions What if the temperature is too low?White coating has formed around the wine corks What if the alarm is ringing? Possible fault SolutionWhat if the display lighting is not working? Mildew is beginning to form on the wine bottle labelsSssrrrrr Blubb, blubbClick Rattling, vibratingAfter sales service MieleCarePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Furniture/fixtures Installation nicheBase VentilationSingle column Installation optionsAppliances attached together using the Merging Kit Side-by-sideInstallation with partition without using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition using the Merging Kit Side panelsDoor dimensions open min DimensionsPower supply 12 305 mmNiche dimensions KWT 16x1 SFBefore you begin Tools needed for installationOptional accessories OtherCheck the installation niche Before installation RemoteVision module Installation Loosen the bracket that holdsHome Security System HSS Preparing the installation niche Mounting AccessoriesAnti-tip-brackets Drill pilot holesSecuring an alternative anti-tip device Sliding the appliance into the installation niche Unscrew the plinthAligning the appliance Attaching the appliance to Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Page Page Alteration rights reserved

KWT1601SF, KWT1611SF specifications

The Miele KWT1611SF and KWT1601SF are premium wine storage units designed for wine enthusiasts who appreciate the nuances of wine preservation and storage. Both models epitomize Miele's commitment to quality, craftsmanship, and innovative technology, ensuring that wine is stored under optimal conditions.

The KWT1611SF boasts a capacity of approximately 34 bottles, while the KWT1601SF holds up to 18 bottles, making both units versatile options for various needs. The elegant design, featuring a glass door with UV protection, not only enhances the aesthetic appeal but also safeguards the wine from harmful light exposure that can alter its quality.

One of the standout features of these models is the precise temperature control. Both units come with two temperature zones, allowing users to store red and white wines at their ideal conditions simultaneously. The upper zone typically ranges from 41°F to 64°F (5°C to 18°C), while the lower zone can be set between 41°F and 57°F (5°C to 14°C). This functionality ensures that each type of wine is maintained at its best.

In terms of humidity, Miele has integrated a humidity regulation system that helps maintain an optimal level, which is crucial for preserving cork integrity and preventing oxidation. The active charcoal filter aids in reducing odors, ensuring that wines develop their distinctive flavors without interference from external smells.

Another significant characteristic of the KWT1611SF and KWT1601SF is the vibration-dampening system. Utilizing a solid, thermally insulated construction, these wine storage units provide a stable environment, minimizing vibrations that can disturb the delicate sediment in wine bottles and ultimately affect taste.

For those who value convenience, both models feature user-friendly controls with an intuitive display, allowing for precise adjustments and easy monitoring. The LED lighting not only enhances visibility but also emits minimal heat, thereby protecting the wine from temperature fluctuations caused by traditional lighting.

In conclusion, the Miele KWT1611SF and KWT1601SF combine functionality with elegant design, making them ideal choices for serious wine collectors. With advanced technologies such as dual-zone temperature control, humidity regulation, and effective vibration dampening, these wine storage units ensure that every bottle is kept in perfect condition, ready to be enjoyed when the occasion arises.