Trane ctv-prc007-en manual Features and and Optional Benefits Features, Standard Features

Page 9

Standard

Features and and Optional

Benefits Features

Standard Features

The following features are provided as standard with all Trane CenTraVac™ chillers:

•Motor-compressor assembly with integral lubrication system.

•Evaporator condenser assembly.

•Two-stage economizer assembly on CVHE/CVHG style units (single-stage on CVHF style units).

•Prewired instrument and control panel.

•Oil and refrigerant charge.

•Oil heater.

•Isolation pads

•Wiring and conduit for purge and oil system interconnection to the main control panel.

•Installation, operation, and maintenance instructions.

•Start-up and operator instruction service.

•Advanced motor protection.

CenTraVac Motor

The motor provided in the Trane CenTraVac chiller is a specially designed squirrel cage, two pole induction motor suitable for 50 and 60 hertz, three-phase current.

Trane CenTraVac motors are cooled by liquid refrigerant surrounding the motor windings and rotor. Use of liquid refrigerant results in uniform low temperatures throughout the motor, thereby promoting long motor life.

Refrigerant/Oil Pump Motor The oil pump motor is a 120 volt, 50/60 hertz, 3/4 hp, 1 phase motor with protective fusing and panel mounted contactor.

Purge

The purge unit motor is a 120 volt, 50/60 hertz, 3/4 hp, 1 phase motor with integral overload protection and panel mounted contactor.

The use of an air-cooled condensing unit obtains separation temperatures in the purge drum as low as 0°F. Normal operating efficiency does not exceed 0.002 lbs. of refrigerant lost per pound of dry air removed. The purge system can be operated at any time, independent of chiller operation.

Optional Features

Trane offers a selection of optional features to either complete the basic chiller installation or to allow modification for special purpose applications.

•Medium voltage (over 600 volts) hermetic compressor motor construction.

•Complete line of compressor motor starters.

•Unit mounted starter accessory on low voltage units up to an RLA of

1080 amps.

•Marine waterboxes for evaporators and condensers

•High pressure (300 psig working pressure) water side construction.

•Free cooling.

•Heat recovery or auxiliary condensers.

•Smooth bore tubing.

•Factory-applied thermal insulation

•One-inch deflection spring isolators for vibration-sensitive installations.

•Building automation systems (BAS) interface

•Variable speed drives

•Internally enhanced tubes

•Various tube wall thicknesses

•UL Label

•Three pass evaporator/one pass evaporator

•Special construction to facilitate chiller disassembly at the job

•CuNi Tubes

•Special paint and controls for outdoor use or corrosive environments

•Unit mounted refrigerator monitor

CTV-PRC007-EN

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CenTraVac Liquid Chillers World’s Most IntroductionEfficient Lowest Emissions ChillerContents Centrifugal Trane HermeticWater Chillers Tradition of InnovationLhcv CenTraVac Modular Chiller system IntroductionBenefits FeaturesAttributes Low PressurePanel ControlOperator Control Panel Capabilities includeBenefits Components FeaturesStandard Features Features and and Optional Benefits FeaturesOptional Features StandardFeatures and Performance Benefits Testing Factory Testing for Assured PerformanceFactory Refrigeration CycleCenTraVac Chiller Operating Cycle Two-Stage CenTraVac P-H Diagram Options UnitUnit Mounted StarterFeatures ReliabilityOperation Integral Bypass Contactors Available options includeFrequency Drives AdaptiveBenefits Large number of part-load operating hours annuallyHigh kW Charges Condenser water temperature relief of chilled water resetUnit Ease of InstallationFree Cooling Ease of OperationFigure O-5 Compressor Operation Schematic Auxiliary Condenser System Auxiliary Options CondenserAuxiliary SystemCondenser ControlsIce Storage SystemSystem Options Heat RecoveryCont Heat RecoverySimultaneous Heating and Cooling System Design ConsiderationsReset Chilled Water Reset Chilled waterChilled Water Application ConsiderationsFor Applications Requiring Tons 60 Hz Choose Lhcv Electrical Information Condenser Water LimitationsSelection Procedure Roughing-in Dimensions Part Load PerformanceEvaporator and Condenser Data Tables Data PerformanceEvaporator Flow RatesMinimum/Maximum Condenser Flow Rates GPM Supply and Motor Lead Wiring and Connections Shipment and AssemblyJobsite Connections Controls Advanced ControlsSystems Performance Controls Control Chiller PlantBuilding Automation and Chiller Plant Control Functions Controls Protections Control FunctionsMachine Protections Functions Controls Diagnostics Modules/Sequence ControlsOperation ModulesUnit is Running Capacity Limited by High Current Hz Compressors WeightsCvhg Dimensions PhysicalEnglish Units SI Units ML &LL 10630 3867 4080 4724 1327 4578 2908 2419 2632 Waterbox Physical Connection Dimensions ArrangementWaterbox Lengths English Units Physical DimensionsWaterbox Lengths Metric Units Mechanical Specification CompressorEvaporator Economizer Condenser/Heat Recovery CondenserPurge System Unit Control PanelRefrigerant and Oil Charge Isolation PadsThermometer Wells and Sight Glasses InsulationTrane Adaptive Frequency Drive AFD AFD Design FeaturesEnvironmental ratings Input Line Reactor OptionTrane Company is a participant in the Green Seal Program

ctv-prc007-en specifications

The Trane CTV-PRC007-EN is an advanced air conditioning unit that epitomizes efficiency and reliability in temperature control. Designed for commercial and industrial applications, this unit stands out with a multitude of features aimed at enhancing performance, energy savings, and sustainability.

One of the key characteristics of the CTV-PRC007-EN is its high cooling and heating capacities, allowing it to cater to a variety of environments. The unit utilizes a scroll compressor, known for its energy efficiency and durable design, which contributes to substantial energy savings over time. The inclusion of variable speed technology further optimizes energy use by adjusting to the specific cooling or heating demands of the space.

Equipped with Trane’s proprietary Sintesis technology, the CTV-PRC007-EN offers superior temperature control while minimizing noise levels. This feature makes it ideal for settings where quiet operation is essential, such as offices, hotels, and conference rooms. The unit’s sound-dampening design reduces operational noise, ensuring a comfortable environment for occupants.

Another significant advantage of the CTV-PRC007-EN is its advanced control system. The integration of Smart Temperature Management allows for precise monitoring and adjustment, enhancing the overall user experience. Additionally, the system is compatible with various building management systems, enabling remote monitoring and control, which can significantly reduce operational costs and improve efficiency.

The CTV-PRC007-EN also embraces eco-friendly refrigerants, aligning with global sustainability goals. By using refrigerants with low global warming potential, Trane demonstrates its commitment to reducing environmental impact while maintaining high performance.

Maintenance is straightforward with the CTV-PRC007-EN. The unit's robust design includes accessible components that simplify servicing, helping to minimize downtime and operational costs. It comes with a comprehensive warranty, underscoring Trane’s confidence in the durability and reliability of its products.

In conclusion, the Trane CTV-PRC007-EN stands as a testament to cutting-edge technology in HVAC solutions. With its energy efficiency, advanced control systems, quiet operation, and eco-friendly features, it is an ideal choice for businesses seeking effective climate control solutions that do not compromise on sustainability or performance.
Top Page Image Contents