| |
Pelican PC600/PC1000 Premium Whole House Water Filter | Page 10 |
Whole House Water Filter Tank Installation
1. Level the Pelican Whole House Water Filter.
Notice:
If the tank is not level, lift the tank straight up 6 inches and tap it on the ground until the tank stands vertical. The bottom of the tank is round and the boot allows the tank to stand upright.
Incoming
Water
Supply
INLET | UPFLOW |
Whole House
Water Filter
PVC Fitting*
Outgoing
Water to
House
1" NPT Assembly
Bypass Valve
DOWNFLOW | INLET |
*Customer supplied,
choose appropriate connection
Figure 7
2.Determine the size and material of your incoming water supply line from the
CAUTION:
Do not
Table 2: Bypass Valve Fittings
Note: The fitting below is designed with a ¼" give to allow for proper pipe alignment. It will not leak and is intended to have some flexibility.
Part | Description | Qty. |
| 1" Plastic Male NPT Assembly: | 1 |
| bag | |
| Assembly (2): |
|
| (2), and Connectors (2) |
|
3.Install the fitting onto the upflow and downflow inlet sides of the Bypass Valve. Follow the diagram supplied with the fitting.
4.Connect the incoming water supply from the to the fitting on the upflow inlet side of the Bypass Valve.
5.Connect the outgoing water supply to the downflow inlet side of the Bypass Valve.
© 2013 Enviro Water Solutions, Inc. | www.pelicanwater.com |
3060 Performance Circle, Suite 2, DeLand, FL 32724 | (877) |