| |
Pelican PC600/PC1000 Premium Whole House Water Filter | Page 7 |
Carbon Tank Soak
!IMPORTANT!
Your system will not be ready for use for a minimum of 48 hours while the Carbon Soak process takes place. Please plan your installation accordingly.
Notice:
Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of steps in a location suitable for water flow.
Garden
Hose
Hose Bib
Assembly
Bypass Valve
Water
INLET
DOWNFLOW 
UPFLOW
INLET
Whole House Water Filter
Figure 3
1.Attach a garden hose to the Hose Bib Assembly
2.Connect the Hose Bib Assembly to the upflow inlet side of the Bypass Valve and hand tighten
3.Fill the Pelican Whole House WaterFilter Tank full until water comes out of downflow inlet side of the Bypass Valve
4.Turn the water off.
5.Remove the garden hose from the Hose Bib Assembly. Do not remove the fitting.
6.Allow the carbon tank to soak for at least 48 hours prior to tank installation.
© 2013 Enviro Water Solutions, Inc. | www.pelicanwater.com |
3060 Performance Circle, Suite 2, DeLand, FL 32724 | (877) |