Pelco 20175, 6400, 20185, 2500JF, 6200, 2300JF, 6300, 2012, 20145JF Installation, Leveling the Appliance

Page 5

INSTALLATION

1.Remove packing carton and all thermopore pieces from the refrigerator, specially one at the back of the compressor. Install the Appliance on a firm, flat surface or a Wooden Pedestal (Chowki).

2. For optimum performance install the refrigerator in a well ventilated

place. Avoid installing the refrigerator near heat generating home

appliances such as heater, stove and in small nooks / corners, direct sun light.

3.Leveling the Appliance

To compensate any floor unevenness, adjust the balance of Appliance by rotating the Leveling Screws clock wise or anti clock wise.

4. Always install your refrigerator in a tilted position as shown.

5.For personal safety, properly ground this Appliance.

Do not ground the refrigerator with a telephone line, gas pipe, etc. It is necessary that refrigerator should be connected to the proper earth point.

12”above

above 4”

 

1/3”

 

approx.

 

The manufacturer will not be responsible for any loss or damage if

IMPORTANT:

precaution in this regard is not observed.

NOTE: Retain the original packing in case you need to ship it at a later date.

04

Image 5
Contents Refrigerator SL Series WB Series Refrigerator Models & SeriesDear Valued Customer Inside Your Starter PackParts Identification Leveling the Appliance InstallationFood Storage Getting StartedICE Cubes Making Temperature ControlSingle Door Refrigerator DefrostingDefrosting Exterior Cleaning Deodorizer DeodorizerProblems Causes Solutions Trouble Shooting TipsTrouble Shooting Tips Safety Precautions PEL Refrigerator Warranty Warranty for PEL Refrigerator Warranty CertificateCSD’s copy Warranty Certificate Customer’s copy 150 Customer Care Centers Crystal Star Plus Premier Page Page Page Page Page Page Page Page Page Page Page Ether