Installation, Location, Leveling

Installation ..........................................................

Your new refrigerator was packed carefully for ship- ment. Remove and discard shelf packing clips (if used)

located just above each shelf where they hook onto the frame. To remove plastic clips wiggle the clips sideways and pull straight out.

Location

•Allow for a free flow of air through the front base grille.

•Install the refrigerator where the room temperature will not go below 55 ° E With temperatures below 55 °, the refrigerator will not run frequently enough to maintain proper temperature in the freezer.

•Allow a minimum 1/2" clearance on the sides, top and back for ease of installation. If the refrigerator is placed with the door hinge side against a wall, you may want to allow additional space so the door can be opened wider.

•Use caution when installing the unit on vinyl or hard- wood floors so as not to mark or otherwise damage the flooring. A piece of plywood, a rug or other mate- rial should be used to protect the floor while posi- tioning the unit.

Leveling

To enhance appearance and to maintain optimal perfo_ mance, the refrigerator must be level. Your refrigerat_ has wheels which can be adjusted for leveling:

•Remove the lower hinge covers (see fig. 1). To do this, grasp each cover near the hinge and apply pre_

sure. The attachment tabs will snap out, allowing removal of the covers.

•Adjust the wheels with a screwdriver (see fig. 2).

•To lock the cabinet in place, turn down both le_ cling/lock feet, located near the front wheels (see fi_ 3). Rear leveling/lock feet are not required.

•Replace the hinge covers.

•If the floor is not level and it is necessary to raise th rear of the cabinet, we suggest rolling the rear wheel onto a piece of plywood or other shim material.

I-] (

_ !]

/• •

Fig.1

Energy Saving 77ps

•Locate the refrigerator away from heat producing

and direct sunlight.

appliances such as the range or dishwasher, heat vents

aroundthe front grille.

•Keep the freezer full to near capacity so less cold air

•Level the refrigerator and do not block ventilation will escape during door openings. When the freezer is

less than two-thirds full, place milk cartons half full of water in the freezer.

•Let hot dishes cool slightly before putting into the refrigerator or freezer,

•Cover liquids.

•Wipe moisture from the outside of containers before placing them into the refrigerator.

•Avoid opening the doors too often.

_)_2_'_		TURNCLOCKWISETO
		TURNCOUNTER-CLOCKWISE
F_ig 2	_	TOLOWERCABINET
F_ig 2	_	RAISECABINETCORNER
" "
		__]
		k<_-_
Fig3.

SS-2 specifications

The Maytag SS-2 is a state-of-the-art washing machine that perfectly balances performance and convenience. Designed with the modern home in mind, it offers a range of features that prioritize efficiency and user-friendliness.

One of the standout features of the Maytag SS-2 is its powerful agitation system, which ensures a thorough clean for even the most stubborn stains. The machine is equipped with an advanced motion technology that mimics hand washing, providing a deep clean while remaining gentle on fabrics. This is particularly beneficial for delicate items that require extra care, as it helps prevent wear and tear.

Energy efficiency is a hallmark of the Maytag SS-2, as it is designed to minimize water and electricity usage without compromising cleaning performance. The machine is ENERGY STAR certified, which means that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only benefits the environment but also results in lower utility bills for consumers.

The Maytag SS-2 features a generous capacity drum, allowing users to wash larger loads of laundry at once. This is ideal for families or those with busy lifestyles, as it reduces the need for multiple wash cycles and saves time. The drum is also constructed from high-quality materials that resist rust and damage, ensuring long-lasting durability.

A user-friendly control panel is another key characteristic of the Maytag SS-2. The intuitive design allows for easy operation, with various wash cycle options that cater to different fabric types and soil levels. Additionally, the machine includes a delay start feature, enabling users to program wash cycles to start at their convenience, which is especially helpful for those with busy schedules.

Another notable technology used in the Maytag SS-2 is the automatic load sensing system. This feature intelligently detects the size of the load and adjusts water levels and wash times accordingly. This not only enhances performance but also conserves water, making it an environmentally friendly choice.

Overall, the Maytag SS-2 is a washing machine that combines innovative technology, energy efficiency, and user-centric design. With its impressive features and characteristics, it stands out as a reliable choice for anyone seeking a high-quality laundry solution. Whether tackling everyday dirt or tough stains, the Maytag SS-2 delivers exceptional results while making the laundry process hassle-free.