GE CV936 manual Hood Lights, To remove

Page 6

Instructions

Care and cleaning of the vent hood.

Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety

ReceptacleSocket

Bulb

Glass cover

Hood Lights

NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.

CAUTION: Before replacing your light bulb, disconnect the electrical power to the hood at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

For your safety, do not touch a hot bulb with bare hands or a damp cloth.

To remove:

Turn the glass cover counterclockwise until the glass cover clears the socket.

Using gloves or a dry cloth, remove the bulb by pulling it straight out.

To replace:

Use a new 12-volt, 20-watt (maximum) Halogen bulb for a G-4 base.

Using gloves or a dry cloth, remove the new bulb from its packaging.

NOTE: Do not touch the new halogen bulb with bare fingers. Touching the bulb with bare fingers will significantly reduce the life of the bulb.

Receptacle

Use gloves or cloth

Push the bulb straight into the receptacle all the way.

Place the glass cover onto the socket and turn clockwise until secure.

For improved lighting, clean the glass cover frequently using a damp cloth. This should be done when the hood is completely cool.

Reconnect electrical power to the hood.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Range Hoods Safety Precautions Read and Save These Instructions Using the hood controls FAN ControlLight Control Care and cleaning of the vent hood Painted Surfaces on some modelsStainless Steel Surfaces on some models Hood Lights To removeProduct Dimensions Read these instructions completely and carefullyFt = 0.3 m 1 = 2.5 cm Duct Cover Installation ClearancesOptional Accessories Commercial Filter KitDuct Fittings Power SupplyAdvance Planning Decorative Duct CoversDuct. It Can Transition To ¼ x 12 Duct Kit JXDW1 Flexible ductingTools and Materials Required Remove the PackagingParts Provided Duct Cover RequirementsTo route house wiring through the wall Determine HOOD, Ductwork and Wiring LocationsTo route house wiring through the ceiling or soffit For Vertical Straight Up DuctingInstall Hood Onto Wall Install Hood SupportInstall Transition Drill Bottom Mounting Hole LocationsInstall Hood to Soffit or Beneath Cabinets Skip this Step if Using Wall Mounting MethodInstall Ceiling Bracket Connect DuctworkInstall Filter Support Install MotorInstall Duct Covers Connect ElectricalInstall Control Knobs Install Filters11A Install Optional Commercial Filters Finalize InstallationPage Before you call for service… Excessively soiled filtersOwnership Registration For Canadian Customers Pour les consommateurs canadiens Range Hood Warranty Mabe Will ReplaceWhat Mabe Will Not Cover Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

CV936 specifications

The GE CV936 is a versatile and powerful gas turbine designed for use in a variety of industrial and power generation applications. With its advanced design and state-of-the-art technologies, the CV936 represents a significant step forward in the field of aeroderivative gas turbines.

One of the standout features of the GE CV936 is its impressive efficiency. This turbine achieves a fuel efficiency rate that allows operators to maximize output while minimizing fuel consumption, thereby reducing overall operating costs. The efficiency extends beyond fuel usage, contributing to lower emissions as the turbine is designed to comply with rigorous environmental regulations.

The CV936 incorporates advanced aerodynamics in its design. Its blades are engineered using sophisticated computer modeling techniques that enhance airflow and optimize performance. The materials chosen for these components are lightweight yet durable, which contributes to the turbine’s ability to operate at high temperatures without degradation in performance.

A significant technology aspect of the GE CV936 is its modular design. This feature not only simplifies maintenance but also allows for quick and efficient upgrades as technology evolves. Operators can benefit from improved performance without needing to replace the entire turbine, which can be a cost-effective solution for many businesses.

Another characteristic that sets the CV936 apart is its robust control system. Coupled with advanced sensors and data analytics capabilities, the turbine provides real-time monitoring and operational insights. This allows for proactive maintenance strategies, reducing downtime and extending the operational lifespan of the equipment.

The turbine's design also accommodates a wide variety of fuels, making it exceptionally flexible for different operational contexts. Whether used in simple cycle, combined cycle, or cogeneration setups, the CV936 can efficiently use natural gas and liquid fuels, giving operators the flexibility to adapt to their specific energy needs.

In summary, the GE CV936 gas turbine is a cutting-edge solution that combines high efficiency, advanced aerodynamics, modular design, and robust control technologies. Its ability to adapt to various fuel types and configurations makes it an excellent choice for companies looking to optimize their power generation capabilities while minimizing environmental impact.
Top Page Image Contents