For your safety Pour votre securité, Hood surfaces

Care and Cleaning

Stainless Steel Hood

For your safety

Pour votre securité

Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Avant de réparer ou de nettoyer votre appareil, débranchez le courant au niveau du panneau de service et verrouillez les mécanismes de débranchement de service pour éviter tout branchement accidentel au courant. Si vous ne pouvez pas verrouiller les mécanismes

de débranchement de service, attachez soigneusement un avertissement bien visible, comme une étiquette, au panneau de service.

Metal grease filter

Clean filter light

Clean the grease filter after 30 hours of “on” time. A red signal light will alert you when 30 hours has passed.

Remove the grease filters and wash them either by hand or in the dishwasher using non-abrasive soap.

To clean, swish the filters in hot soapy water or wash them in the dishwasher. Do not use abrasive cleansers.

Replace the filters and make sure that they are correctly seated in the filter channels. Adjust as necessary until the red signal light stops blinking.

NOTE: To remove filters, push them back and down using the knob.

Front

For proper operation, make sure the filters are securely seated into the channels.

Hood surfaces

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface, use warm sudsy water, a stainless steel cleaner such as Kleen King®, or an all-purpose liquid or spray cleaner. Always scrub in the direction of the grain. Rinse thoroughly with a sponge or cloth and clean water. Dry with a soft, clean cloth.

After cleaning, use a stainless steel polish, such as Stainless Steel Magic®, Revere Copper and Stainless Steel Cleaner® or Wenol All Purpose Metal Polish®. Follow the product instructions for cleaning the stainless steel surface.

Light bulbs

To change the light bulbs:

1.Remove the trim ring by turning it counterclockwise.

2.Grasp the bulb on the edges and pull it straight out.

3.Replace with the same size bulb.

These 12 volt, 20 watt halogen bulbs are available at specialty lighting stores. Ask for GE bulb or equivalent: Q20MR16/C/CG40–BAB.

On some models, the lights

are located on the sides,

on the underside of the hood.

On some models, the lights are located on the front and back, on the underside of the hood.

ZV950, ZV1050 specifications

The GE ZV950 and ZV1050 are advanced digital microprocessor-based relay protection devices designed for various applications in electrical utilities and industrial facilities. These devices are engineered to enhance system reliability and safety by providing accurate monitoring, protection, and control of electrical systems.

The GE ZV950 is specifically tailored for overhead line protection and transformer applications. It features multiple protection functions including overcurrent, earth fault, and distance protection. The relay is equipped with real-time measurements and advanced fault detection capabilities that significantly reduce outage durations. Its ergonomic design facilitates easy installation and integration into existing systems, allowing for seamless upgrades and enhancements.

On the other hand, the GE ZV1050 is a versatile protection relay designed for a broader range of applications. It boasts enhanced features such as differential protection, which is crucial for identifying discrepancies in current between the input and output terminals, thereby preventing severe equipment damage. Additionally, the ZV1050 supports a wide range of communication protocols, including IEC 61850, which allows for interoperability with a variety of devices and systems, making it an ideal choice for modern smart grid applications.

Both models utilize cutting-edge technologies, including digital signal processing and advanced algorithms for fault detection and diagnosis. This ensures that operational data are processed and analyzed efficiently, providing operators with timely information to make informed decisions. The relays also come equipped with comprehensive event logging and fault analysis capabilities, enabling thorough investigative processes following any disturbances.

In terms of characteristics, both ZV950 and ZV1050 relays are designed to withstand harsh environmental conditions, ensuring reliability in outdoor and industrial settings. They feature robust enclosures that protect against dust, moisture, and mechanical impacts, while also maintaining adherence to industry standards for safety and performance.

Overall, the GE ZV950 and ZV1050 represent the next generation of protection relays, equipped with features and technologies that not only enhance operational efficiency but also contribute to the longevity of electrical infrastructure. By integrating these cutting-edge devices into their systems, utilities and industries can achieve a more reliable and resilient electric grid.