GE ZV1050, ZV950 owner manual Questions? Use this problem solver Problem Solver, OFF and on

Page 8

Questions?

Use this problem solver!

 

 

The Problem Solver

 

 

 

 

 

 

 

 

Stainless Steel Hood

 

 

 

 

 

PROBLEM

POSSIBLE CAUSE

 

 

 

 

 

FAN DOES NOT

• A fuse may be blown or a circuit breaker tripped. Replace fuse or

 

OPERATE WHEN

reset circuit breaker.

 

THE SWITCH IS ON

 

 

 

 

 

 

 

 

FAN FAILS TO

• Fan blade striking the hood shell.

 

CIRCULATE AIR

• Excessively soiled filter should be checked and corrected before

 

 

 

 

using the hood again.

 

 

 

 

 

FAN OPERATES BUT

• Check to be sure the filter is clean. If replacing the filter does not

 

MOVES AIR SLOWER

correct the problem, call for service.

 

THAN NORMAL

 

 

 

 

 

 

 

 

FAN KEEPS GOING

• The motor is probably overheating and turning itself off. This can

 

OFF AND ON

be harmful to the motor. Check to be sure the filter is clean. If off

 

 

and on cycling continues, call for service.

 

 

 

 

 

CLEAN FILTER LIGHT

• The filters have been in place for 30 hours of “on” time. Remove the

 

IS ON OR BLINKING

filters, clean if necessary and replace them. Make sure they are

 

 

correctly seated in the filter channels. Adjust as necessary until the

 

 

red signal light stops blinking. See the Metal grease filter/

 

 

Clean filter light section.

 

 

 

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Stainless Steel Range Hood Contents Before using your stainless steel hoodIntroduction Write down the model & serial numbersIf you need service Save time & money Consumer InformationRead and Save These Instructions Lisez ET Conservez CES Instructions Controls and Features Controls Implement holdersFor your safety Pour votre securité Metal grease filter Clean filter lightHood surfaces Light bulbsQuestions? Use this problem solver Problem Solver OFF and onIn-Home Repair Service 800.444.1845 What is Covered Registration Ownership Product Consumer Consumer Product Ownership Registration
Related manuals
Manual 12 pages 37.27 Kb

ZV950, ZV1050 specifications

The GE ZV950 and ZV1050 are advanced digital microprocessor-based relay protection devices designed for various applications in electrical utilities and industrial facilities. These devices are engineered to enhance system reliability and safety by providing accurate monitoring, protection, and control of electrical systems.

The GE ZV950 is specifically tailored for overhead line protection and transformer applications. It features multiple protection functions including overcurrent, earth fault, and distance protection. The relay is equipped with real-time measurements and advanced fault detection capabilities that significantly reduce outage durations. Its ergonomic design facilitates easy installation and integration into existing systems, allowing for seamless upgrades and enhancements.

On the other hand, the GE ZV1050 is a versatile protection relay designed for a broader range of applications. It boasts enhanced features such as differential protection, which is crucial for identifying discrepancies in current between the input and output terminals, thereby preventing severe equipment damage. Additionally, the ZV1050 supports a wide range of communication protocols, including IEC 61850, which allows for interoperability with a variety of devices and systems, making it an ideal choice for modern smart grid applications.

Both models utilize cutting-edge technologies, including digital signal processing and advanced algorithms for fault detection and diagnosis. This ensures that operational data are processed and analyzed efficiently, providing operators with timely information to make informed decisions. The relays also come equipped with comprehensive event logging and fault analysis capabilities, enabling thorough investigative processes following any disturbances.

In terms of characteristics, both ZV950 and ZV1050 relays are designed to withstand harsh environmental conditions, ensuring reliability in outdoor and industrial settings. They feature robust enclosures that protect against dust, moisture, and mechanical impacts, while also maintaining adherence to industry standards for safety and performance.

Overall, the GE ZV950 and ZV1050 represent the next generation of protection relays, equipped with features and technologies that not only enhance operational efficiency but also contribute to the longevity of electrical infrastructure. By integrating these cutting-edge devices into their systems, utilities and industries can achieve a more reliable and resilient electric grid.
Top Page Image Contents