GE ZV950, ZV1050 owner manual Light bulbs, To change the light bulbs

Page 7

Care and Cleaning

Stainless Steel Hood

Light bulbs

On some models, the lights are located on the sides, on the underside of the hood.

On some models, the lights arelocated on the front and back, on the underside of the hood.

NOTE: The glass cover should be removed only when cool.

CAUTION:

Before replacing the bulb, disconnect electrical power to the hood at the main fuse or circuit breaker or main power disconnect switch located on the control housing. Allow bulbs to cool before touching.

For safety, do not touch a hot bulb with bare hands or a damp cloth.

To change the light bulbs:

1.Remove the lamp lens cover by inserting a small flat-blade screwdriver into each of the three slots and gently prying it free.

NOTE: Do not remove the outer trim ring (lamp assembly).

2.Grasp the bulb and pull it straight out.

3.Using gloves or a dry cloth, remove the new bulb from the packaging. (Wearing latex gloves may offer a better grip.) The bulb must be the same wattage, 120-volt, 25-watt halogen with a G-9 base. Early-life bulb failure may occur if wattage is too high.

4.Push the bulb straight all the way into the receptacle.

5.Replace the lens cover by inserting the three retaining tabs into the slots and pressing into place.

NOTE: For improved lighting, clean the glass cover frequently using a damp cloth. This should be done when the hood is completely cool.

6.Reconnect electrical power to the hood.

NOTE: Order replacement 120-volt, 25-watt halogen bulb with G-9 base, WB25X10020.

These bulbs can be ordered from your GE supplier.

Use a small flat-blade screwdriver to remove the lamp lens cover.

Bulb

Outer trim ring (lamp assembly) Do not remove

Tab

Removable inner lamp lens cover

NOTE: Make sure the tabs are inserted into the slots.

ONLY use a new 120-volt, 25-watt halogen bulb with a G-9 base.

Receptacle

Use gloves or cloth

NOTE: Do not touch the new halogen bulb with bare fingers. Skin oils can cause early- life bulb failure.

7

Image 7
Contents ZV950 ZV1050 Owner’s ManualContents Before using your stainless steel hoodWrite down the model Serial numbers FIRE, USE only Metal Observe the FollowingTOP Grease FIRE, Observe the Following Range TOP Grease FireVapeurs Explosives Réduire LE Risque D’INCENDIE, DE SecousseÉlectrique OU DE Blessure , Observez LES Précautions SuivantesControls Controls and FeaturesHood surfaces Care and CleaningFor your safety Pour votre securité Metal grease filter Clean filter lightTo change the light bulbs Light bulbsProblem Possible Cause Use this problem solver Problem SolverL4Y 4G1 BOXPage 800.626.2000 Consumer ServicesDUUDQWRU*HQHUDOOHFWULF&RPSDQ\/RXLVYLOOH. WarrantyLimited ONE-YEAR Warranty ‡DPDJHFDXVHGDIWHUGHOLYHU\ ‡,PSURSHULQVWDOODWLRQ
Related manuals
Manual 12 pages 30.1 Kb

ZV950, ZV1050 specifications

The GE ZV950 and ZV1050 are advanced digital microprocessor-based relay protection devices designed for various applications in electrical utilities and industrial facilities. These devices are engineered to enhance system reliability and safety by providing accurate monitoring, protection, and control of electrical systems.

The GE ZV950 is specifically tailored for overhead line protection and transformer applications. It features multiple protection functions including overcurrent, earth fault, and distance protection. The relay is equipped with real-time measurements and advanced fault detection capabilities that significantly reduce outage durations. Its ergonomic design facilitates easy installation and integration into existing systems, allowing for seamless upgrades and enhancements.

On the other hand, the GE ZV1050 is a versatile protection relay designed for a broader range of applications. It boasts enhanced features such as differential protection, which is crucial for identifying discrepancies in current between the input and output terminals, thereby preventing severe equipment damage. Additionally, the ZV1050 supports a wide range of communication protocols, including IEC 61850, which allows for interoperability with a variety of devices and systems, making it an ideal choice for modern smart grid applications.

Both models utilize cutting-edge technologies, including digital signal processing and advanced algorithms for fault detection and diagnosis. This ensures that operational data are processed and analyzed efficiently, providing operators with timely information to make informed decisions. The relays also come equipped with comprehensive event logging and fault analysis capabilities, enabling thorough investigative processes following any disturbances.

In terms of characteristics, both ZV950 and ZV1050 relays are designed to withstand harsh environmental conditions, ensuring reliability in outdoor and industrial settings. They feature robust enclosures that protect against dust, moisture, and mechanical impacts, while also maintaining adherence to industry standards for safety and performance.

Overall, the GE ZV950 and ZV1050 represent the next generation of protection relays, equipped with features and technologies that not only enhance operational efficiency but also contribute to the longevity of electrical infrastructure. By integrating these cutting-edge devices into their systems, utilities and industries can achieve a more reliable and resilient electric grid.