GE ZV850 installation instructions Install Decorative Duct Covers

Page 11

Step8

Install

Decorative

Duct Covers

Installation

36" Island Vent Hood

 

 

Top Duct

Pretap

Install Screw on

Cover

Each Side

 

2 Screw

 

 

Holes

 

Bottom Duct Cover

 

Top Duct

Bottom Duct

 

Cover

Cover

Top Duct

Cover

Stop Screw

Install Stop

Screw in One

of 3 Holes

Pretap or drive decorative screw into the screw holes on the support frame. This will make screw installation easier.

Separate the two decorative duct covers.

Select the inside (top) cover, which has two screw holes in the top.

Slide the decorative duct cover over the support frame and push to the ceiling.

Attach to the hood support at the top with 2 supplied decorative screws.

Locate the stop screw in the envelope taped to the front of the hood. Set aside.

Slide the bottom decorative duct over the installed top duct and push up past the stop screw hole location.

Install the supplied temporary stop screw in one of 3 holes in the support frame or the top duct cover to prevent the bottom decorative duct cover from sliding down.

The stop screw must be installed. Failure to do so could result in personal injury or damage to the duct cover.

11

Image 11
Contents GE Monogram Installation Instructions Island Vent Hood Contents Design Information Required AccessoryGrounding Instructions Power SupplyTools Materials Required Electrical supplyFlexible ducting Duct fittingsCeiling support structure Advance PlanningPlan the location Finish the Ceiling DuctworkInstallation Check Installation HardwareInstall lower support frame Install Support FrameInstall upper support frame To Find Required Duct Length Secure WiringSize Install Ductwork WiringInstall Decorative Duct Covers Verify that power is turned off at the source Install HoodSlide Duct Cover Down Install Side Utility Bars Install Filters Finalize Installation Island Vent Hood Monogram
Related manuals
Manual 32 pages 47.6 Kb

ZV850 specifications

The GE ZV855, ZV755, ZV850, and ZV750 represent a significant leap in the realm of modern gas turbine technology. These models, primarily used in power generation, have been engineered with an emphasis on efficiency, reliability, and environmental sustainability. Their advanced features and capabilities make them ideal for both utility companies and industrial applications.

The GE ZV855 stands out with its high efficiency and flexibility, capable of generating up to 50 MW of power. One of its main features is the innovative combustion system, which allows for a wide range of fuels, including natural gas and biofuels. The turbine design incorporates advanced aerodynamics for improved performance, while also ensuring reduced emissions of nitrogen oxides (NOx) and carbon dioxide (CO2). This makes the ZV855 an optimal choice for those looking to comply with stringent environmental regulations.

In a similar vein, the ZV755 offers versatility with a slightly lower power output, around 40 MW, while maintaining similar efficiency levels. It is designed for quick starts and operational flexibility, making it ideal for peaking power plants. The ZV755 utilizes state-of-the-art digital control systems, allowing for real-time performance monitoring and predictive maintenance, which enhances reliability and reduces downtime.

The ZV850 model is primarily tailored for combined cycle applications, achieving higher thermal efficiency. This turbine can operate efficiently in tandem with steam turbines, allowing for a significant reduction in fuel consumption. Its advanced heat recovery steam generator (HRSG) technology enables it to capture waste heat and convert it into additional power, further improving the overall efficiency of the power plant.

Lastly, the ZV750 is known for its compact design and modular construction, facilitating easier installation and maintenance. With a power output similar to ZV755, it also emphasizes low emissions and operational efficiency. The turbine includes smart grid capabilities, enabling seamless integration into modern energy management systems.

Collectively, these GE turbine models represent the forefront of gas turbine technology, highlighting a commitment to operational excellence and environmental stewardship. Their unique features and advanced technologies position them well for future energy demands, making them indispensable in the transition towards a more sustainable energy landscape.