GE JE1465J warranty Cooti~ by~me, UsiW the ~me Cook II Feature, How to Use Auto Start

Cooti~ by~me

TI~ COOK I & II allows you to microwave for a .Dreset amount of time using automatic power level 10 (High), or change power level automatically.

Power level 10 (High) is recommended for most cooking, but you may change this for more flexibility. See your cookbook.

To become better acquainted with time cooking, make a cup of coffee by following the steps below.

III

Step 1: Fill a cup 2/3 full of water, add 1 teaspoon of instant coffee and stir to dissolve. Use a cup that has no metal decoration and is microwave safe (refer to Microwaving Tips on page 3). Place cup in oven and close door.

Step 2: Touch TIME COOK I & 11

pad. Display shows “: O“ and “POWER 10:’ “ENTER COOK TIME” flashes.

Step 3: Select your time. Touch

1 and M~UTE pad for one minute. Display shows “1:00” and “POWER 101’ “COOK TIME” flashes.

Because automatic power level 10 is recornrnendd for this cup of coffee, there is no need to change the power level. (If power level 10 is not appropriate, see “How to Change Power Level” at right.)

Step4: Touch START. “COOK TIMEJ’ “POWER 10” and time counting down show on display.

Step 5: When time is up, the oven signals and flashes “End~’ Oven, light and fan shut off.

Step 6: Open the door.

UsiW the ~me Cook II Feature

The Time Cook II feature lets you set two time cooking functions within one program. This is ideal if you want to change power levels during your cooking operations. Here’s how to do it.

Step 1: Place food in oven in microwave-safe container and close the door.

Step 2: Touch TIME COOK I & II.

Display shows “: O“ and “POWER 10~’ “ENTER COOK ~E” flashes.

Step 3: Select your cooking time. For example, touch 2, 1 and 5 for two minutes and 15 seconds.

Display shows “2:E” and “POWER 10~’ “COOK TIME” flashes.

Step 4: Touch TIME COOK I & II.

Step 5: Set your cooking time.

I How to Change Wwer bvel I

After setting cooking time, touch POWER LEVEL pad, then touch desired number for new power level.

Step 6: Touch START.

Step 7: “POWER 10” is displayed and “COOK TIME I“ counts down.

Step 8: At the end of “COOK TIME I;’ the second power level is displayed and “COOK TIME II” is shown counting down.

Step 9: When time is up, the oven signals and flashes “End~’ The oven, light and fan shut off.

Step 10: Open the door.

8

How to Use Auto Start

The Auto Stirt feature allows you to program your oven to begin cooking at a preset time of day— up to a D-hour delay.

To Use Auto S@rt

Step 1: Touch AU~ START pad (instead of START pad).

Step 2: Enter the time you want the oven to start. (Be sure your microwave oven clock shows the correct time of day.)

Step 3: Enter your desired cooking program.

Step 4: Touch START pad. The oven will automatically start at the desired time.

Questions and Answers

Q. I set my oven for the time called for in the recipe, but at the end of the time allowed, my food wasn’t done. What happened?

A. Since house power varies due to time or location, many Time Cook recipes give you a time range to prevent overcooking. Set the oven for minimum time, test the food for doneness, and cook your food a little longer, if necessary.

Q. I touched the number pads and selected my power level. When I touched START, however, my oven didn’t come on. Why not?

A. The TIME COOK I & 11 pad must be touched before setting the number pads or else your oven will not begin cooking.

Q. I want to cook on a power level other than High. What do I need to do?

A. To cook on a power level other than High, first touch the TIME COOK pad and set the desired cooking time. Then touch the POWER LEVEL pad. “POWER 10” appears on the display panel. Enter new power level number and touch START.

Q. Can I interrupt my Time Cook function to check the food?

A. Yes. To resume cooking, simply close the door and press the START pad. The timer must be reset for cooking to resume unless time is remaining on timer.