ge.com
ADAPTER PLUGS
Usage situations where appliance’s power cord will be disconnected
Safety Information
infrequently.
Because of potential safety hazards under certain conditions,
we strongly recommend against the use of an adapter plug. However,
if you still elect to use an adapter, where local codes permit,
a TEMPORARY CONNECTION may be made to a properly grounded
(Adapter plugs not permitted in Canada)
Align large prongs/slots
| Ensure proper ground | |
TEMPORARY | and firm connection | |
before use. | ||
METHOD | ||
|
Operating Instructions
The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.
CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, not insulated, and the wall receptacle is grounded through the house wiring.
You should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.
When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE the appliance until a proper ground has again been established.
Usage situations where appliance’s power cord will be disconnected frequently.
Do not use an adapter plug in these situations because frequent disconnection of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should have the
the appliance.
Troubleshooting Tips
Consumer Support
9