GE 39-40425, DE68-02957A warranty C1. Attach the Mounting Plate to the Wall

Page 19

Installation Instructions

C

RECIRCULATING (Non-Vented Ductless)

INSTALLATION OVERVIEW

C1.

Attach Mounting Plate to Wall

C2.

Prepare Top Cabinet

C3.

Check Microwave Assembly

C4.

Adapt Blower for Recirculation

C5.

Mount the Microwave Oven

C6.

Install Charcoal Filter

C1. ATTACH THE MOUNTING

PLATE TO THE WALL

Remove the template from the rear wall. The mounting plate must be secured to the wall using at least 3 toggle bolts and one wood screw. The wood screw must engage a wall stud.

1Remove the toggle wings from the bolts.

2Insert the bolts into the mounting plate through

the holes designated to go into drywall and reattach the toggle wings to 3⁄4″ onto each bolt.

To use toggle bolts:

Spacing for Toggles

More Than Wall

Thickness

Mounting

Toggle Wings

Toggle

Plate

Bolt

 

Wall

Bolt End

3Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.

NOTE: Before tightening the toggle bolts and the wood screw(s), check again to be sure that the mounting plate is level and centered left to right.

CAUTION: Be careful to avoid pinching fingers between the back of the mounting plate and the wall.

4Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. Be careful not to over-torque toggle bolts.

C2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET

The top cabinet template will help you locate the top support screw holes and power cord cutout locations.

•Read the instructions on the TOP CABINET TEMPLATE.

•Tape it underneath the top cabinet.

•Drill the holes, following the instructions on the

TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Read Carefully Keep These Instructions Before YOU BeginContents Installation InstructionsElectrical Requirements Important Safety InstructionsOutside TOP Exhaust Example only Hood ExhaustOutside Back Exhaust Example only Maximum duct length Exhaust connectionAdditional Parts DAMAGE-SHIPMENT/ InstallationParts Included Hardware PacketMounting Space Tools YOU will NeedRemoving the Microwave Placement of the Mounting PlateFinding the Wall Studs Template aligned with front overhang on cabinet bottom Determining Wall Plate Location Under Your CabinetDetermining Rear Mounting Screw Locations See Recirculating NON-VENTED DuctlessA1. Attach the Mounting Plate to the Wall Installation OverviewTo use toggle bolts A2. USE TOP Cabinet Template for Preparation of TOP Cabinet A3. Install the DamperA3. Install the Damper A4. Mount the Microwave OvenA6. Connecting Ductwork A5. Adjust the Exhaust AdaptorA4. Mount the Microwave Oven B1. Preparing the Rear Wall For Outside Back Exhaust Installation OverviewB4. Adapting Microwave Blower for Outside Back Exhaust B2. Attach the Mounting Plate to the WallB3. USE TOP Cabinet Template for Preparation of TOP Cabinet B4. Adapting Microwave Blower for Outside Back Exhaust B6. Mount the Microwave Oven C2. USE TOP Cabinet Template for Preparation of TOP Cabinet C1. Attach the Mounting Plate to the WallC3. Adapting Microwave Blower for Recirculation C4. Mount the Microwave Oven C3. Adapting Microwave Blower for RecirculationC4. Mount the Microwave Oven C5. Installing the Charcoal Filter AccessoryBefore YOU USE Your Microwave 39-40425 10-04 JR DE68-02957A LEA Cuidadosamente Guarde Estas Instrucciones Antes DE EmpezarInformación general ContenidoGuía de instalación paso por paso Requisitos Eléctricos Instrucciones DE Seguridad ImportantesEscape Superior Externo Ejemplo Solamente Campana DE EscapeEscape Posterior Externo Ejemplo Solamente Longitud máxima del conducto Conexiones de escapePartes Adicionales Daños ENVÍO/INSTALACIÓNPartes Incluidas Paquete DE ElementosEspacio DE Montaje Herramientas QUE NecesitaráCómo Encontrar LOS Postes DE Viga EN LA Pared Cómo Colocar EL Plato DE MontajeEL Horno Microondas Debe Quedar Nivelado Nota no Instale EL Plato EN Este Momento Ver página Recirculación SIN Conducto DE VentilaciónA1. Cómo Adherir EL Plato DE Montaje a LA Pared Perspectiva General DE LA InstalaciónPara usar los tornillos basculantes A4. Cómo Montar EL Horno Microondas A3. Instale EL Regulador DE TiroA3. Instale EL Regulador DE TiroA6. Cómo Conectar EL Conducto A4. Cómo Montar EL Horno MicroondasA5. Cómo Ajustar EL Adaptador DE Escape B1. Cómo Preparar LA Pared Posterior Para EL Escape B2. Cómo Adherir EL Plato DE Montaje a LA Pared B4. Cómo Adaptar EL VentiladorDEL Microondas Para EL Escape Posterior Exterior B6. Cómo Montar EL Horno Microondas Perspectiva General DE LA Instalación Recirculación Sin conducto de ventilaciónC1. Cómo Adherir EL Plato DE Montaje a LA Pared DEL Microondas Para LA Recirculación C3. Cómo Adaptar EL VentiladorC3. Cómo Adaptar EL Ventilador C4. Cómo Montar EL Horno MicroondasC5. Cómo Instalar EL Filtro DE Carbonilla C4. Cómo Montar EL Horno MicroondasAntes DE Comenzar a Usar SU Horno Microondas 39-40425 10-04 JR Impreso en Malasia DE68-02957A

39-40425, DE68-02957A specifications

The GE DE68-02957A,39-40425 is a smart appliance that seamlessly combines advanced technology with user-centric design to enhance home convenience and efficiency. This model exemplifies the latest in kitchen innovation, catering to the needs of modern households.

One of the standout features of the GE DE68-02957A is its intuitive touchscreen interface, which allows users to easily navigate through various settings and features. This user-friendly control panel is designed to streamline operation, enabling households to customize their cooking experience. In addition, the appliance comes equipped with Wi-Fi connectivity, allowing users to monitor and control their appliance remotely using a smartphone app. This feature is particularly convenient for busy individuals who can preheat their ovens or adjust settings while on the go.

The GE DE68-02957A also boasts advanced cooking technologies, such as true European convection with direct air, ensuring even cooking and browning results. This system circulates hot air around the food, cooking it to perfection while preserving moisture and flavor. Furthermore, it features multiple cooking modes, including bake, roast, broil, and air fry, offering versatility to handle a wide variety of recipes.

This appliance is designed for energy efficiency, which is crucial in today's eco-conscious market. Many of its features are tailored to minimize energy consumption without compromising performance, making it an environmentally friendly choice for consumers. It not only helps in reducing utility bills but also supports sustainable living practices.

Safety is also a primary concern with the GE DE68-02957A. The appliance is equipped with advanced safety measures such as automatic shut-off and child locks, providing peace of mind for households with young children.

Durability and design are other key characteristics of this model. Constructed with high-quality materials, it is built to withstand the rigors of daily use while maintaining an attractive appearance. The sleek, modern design blends well with various kitchen décors, enhancing the overall aesthetics of the space.

In summary, the GE DE68-02957A,39-40425 is a cutting-edge appliance that integrates smart technology, user-friendly features, energy efficiency, and durability, making it a valuable addition to any contemporary kitchen. Its innovative functionalities cater to a wide range of culinary needs, ultimately transforming the cooking experience for users.
Top Page Image Contents