![](/images/new-backgrounds/1075275/7527585x1.webp)
If Something Goes Wrong
Before You Call For Service
Problem | Possible Cause | What to Do |
| ||
Oven will not | A fuse in your home | • Replace fuse or reset circuit breaker. |
start | may be blown or the |
|
| circuit breaker tripped. |
|
| Power surge. | • Unplug the microwave oven, then plug |
|
| it back in. |
| Plug not fully inserted | • Make sure the |
| into wall outlet. | oven is fully inserted into wall outlet. |
“PLEASE INSERT | Probe has been | • Insert the probe properly into the wall |
PROBE “ appears | forgotten or not | receptacle. |
on display | inserted properly. |
|
|
|
|
Floor of the oven is | The cooktop light is | • This is normal. |
warm, even when | located below the oven |
|
the oven has not | floor. When the light |
|
been used | is on, the heat it |
|
| produces may make the |
|
| oven floor get warm. |
|
“BAD PROBE” | The probe has not been | • Insert the probe properly into the wall |
appears on display | completely inserted | receptacle. |
| into the wall receptacle. |
|
| The probe is defective. | • Replace the probe. |
|
|
|
“LOCKED” appears | The control has been | • Press and hold CLEAR/OFF for |
on display | locked. | about 3 seconds to unlock the control. |
|
|
|
43