GE JV656 36, JV356 30 important safety instructions Vertical Venting

Page 3

4.Use the hood as a template. Mark the locations on the cabinet or wall for ductwork, electrical wiring and keyhole screw slots.

Cut holes at marked locations for duct and electrical wiring. For the vertical duct, cut out 3/4″ extra toward the front of the cabinet for movement of the duct when installing the hood.

5.Run the electrical wires through the wall or cabinet according to National Electrical Code and applicable local codes.

NOTE: DO NOT turn the power on until installation is complete.

6. Drive the screw partway

Keyhole slot

in canopy

into the center of the

 

narrow neck of the keyhole

 

slots marked on the

Screw

cabinets.

(supplied)

7.Follow the directions for vertical or horizontal venting.

NOTE: If the venting installation is NOT correct, the blower will run at maximum RPM regardless of the speed control setting.

When installing the blower housing, be sure wires cannot contact the blower wheel.

VERTICAL VENTING

(If the roof cap has a damper, do not install the damper blade on the hood.)

Attach the damper with the small sheet metal screws (#8 x 1/4″).

Check the damper

for free operation.

Damper blade

to front

Open the damper

 

 

blade to

 

 

approximately 80

 

 

 

Damper

degrees.

 

 

 

 

Position the blower for vertical discharge. The air flow arrow on the blower should point up towards the vent opening.

Blower discharge

3

Air flow arrow

5 This surface to rear

When the blower is in position, snap the blower retainer bar toward the front into the indent.

Reattach the plug into the junction box.

HORIZONTAL VENTING

(If the wall cap has a damper, do not install the damper blade on the hood.)

Attach the damper with the small sheet metal screws (#8 x 1/4″).

Check the damper

 

for free operation.

 

Open the damper

Damper

blade to

Damper

approximately 80

blade to top

degrees.

 

Position the blower for horizontal discharge. The air flow arrow on the blower should point to the rear vent opening.

This surface to top

5

Air flow arrow

3

Blower discharge

When the blower is in position, snap the blower retainer bar toward the front into the indent.

Reattach the plug into the junction box.

8.Lift the hood into position and feed the house wiring through the wiring knockout.

Slide the hood back against the wall.

Tighten the mounting screws. Be sure the screw heads are in the narrow neck of the keyhole slot.

9.Complete the electrical wiring in the wiring box according to National Electrical Code and local codes.

NOTE: This hood must be permanently grounded.

10.Replace the junction box cover and blower assembly.

Reattach the plug into the junction box.

Install light bulbs (not supplied with the hood). Reattach bottom motor/light cover and filters.

11.Installation is complete. Turn on the power.

3

Image 3
Contents If You Need Service… Important Safety InstructionsInstallation Instructions Vertical Venting Ductwork Requirements Ducting Chart

JV656 36, JV356 30 specifications

The GE JV356 30 and JV656 36 are innovative products in the market of gas and electric ranges, showcasing GE's commitment to quality, performance, and technology. These models are designed to meet the diverse needs of modern kitchens, combining functionality with stylish design.

The GE JV356 is a 30-inch model, ideal for compact spaces while still providing an impressive cooking capacity. It features a traditional oven with a clean design that seamlessly integrates into any kitchen décor. The JV356 is equipped with a self-cleaning function, which takes the hassle out of maintaining an immaculate oven. This model also comes with four powerful sealed burners, including a high-BTU burner for quick boiling, making meal preparation efficient and speedy. The continuous griddle feature allows home cooks to easily maneuver pots and pans across the cooking surface, enhancing convenience.

On the other hand, the GE JV656 36 is designed for those who want a larger cooking surface. The 36-inch range allows for more burners and features, catering to cooks who may require additional capacity for larger families or entertaining. This model boasts six sealed burners, providing optimum cooking flexibility. Furthermore, the JV656 includes a dual oven feature, allowing simultaneous cooking at different temperatures, perfect for elaborate meals. Both models are equipped with advanced technologies that optimize cooking performance. Features such as air fry modes, convection cooking, and precision temperature control ensure that every meal is cooked to perfection.

In terms of energy efficiency, both the JV356 and JV656 models adhere to modern standards, utilizing innovative insulation and control technologies that minimize energy waste while boosting performance. Additionally, their sleek, stainless steel finishes not only enhance their aesthetic appeal but also resist smudging and staining.

With their commitment to user-friendly design and advanced cooking technologies, the GE JV356 30 and JV656 36 are perfect for home chefs who value quality, versatility, and reliability in their kitchen appliances. Whether preparing everyday meals or hosting festive gatherings, these ranges are engineered to elevate the cooking experience. Overall, GE continues to push the boundaries of kitchen technology, making mealtime more enjoyable and efficient for everyone.