Installation Instructions

WARNING: Disconnect power before servicing or cleaning the unit.

Care of Filter

For greatest efficiency the aluminum filter should be cleaned periodically. To remove the filter, pull the tab to the side and then down. Soak it in hot water and detergent. Rinse and dry thoroughly before replacing.

Care of Exterior Surfaces

Use a mild detergent to clean the hood. DO NOT use abrasive cleansers.

Lights

This hood has two lights. Do not use bulbs larger than 75 watts. There are two light levels. To change light bulbs, first remove the filters. It is not necessary to remove the blower cover.

Charcoal Filter Pads

(not included)

This filter should be inspected periodically and, when it becomes saturated, it should be replaced. There are no effective means of reactivating this filter. Order WB13X5008.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.

SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR’S USE.

Cabinet Height

For most efficient operation, the top of the hood should be approximately 66″ (167.6 cm) from the floor.

Installing the Range Hood

Determine which direction the vent will be installed (top or rear).

1.Remove filters and motor/light cover (3 screws).

2.Remove the blower motor by removing the “packing screw” and the clip on the retainer bar.

Discard the clip and screw.

Unplug the motor from the junction box.

Tools Required:

1 4″	wood bit.	• Pliers.
• Drill; 1 ⁄

• Flat blade screwdriver. • Pencil, ruler and level.

• Saber saw or keyhole saw.

• Caulking, metal snips, duct tape, ducts (with

elbow and transition, if necessary) and wall cap

Snap the blower retainer bar toward the rear of the hood to release the blower. Remove the blower.

3.Remove the junction box cover.

Top Vent

Knockout

Snap lock blower retainer bar

or roof caps, as required.

Non-Venting

Follow the instructions under “Vented Installation” for wiring and mounting. Omit the ductwork preparation. Install WB13X5008–Charcoal filter pads replaceable.)

Vent-less operation discharge vent

Venting

This hood must be vented vertically through upper cabinets or horizontally through an outside wall. Ductwork is not included.

Improper duct sizing or restrictive roof caps reduce air moving capacity and will not provide enough ventilation for an indoor electric grill.

Indoor electric grills produce more smoke than normal cooking and require at least 410 CFM to provide adequate ventilation.

Follow the guidelines for proper duct sizing in the ducting charts. NOTE: The venting system must exhaust to the outside.

Remove the selected wiring knockout and duct knockout from the top or rear of the hood. Use a flat blade screwdriver to cut the tabs.

JV656 36, JV356 30 specifications

The GE JV356 30 and JV656 36 are innovative products in the market of gas and electric ranges, showcasing GE's commitment to quality, performance, and technology. These models are designed to meet the diverse needs of modern kitchens, combining functionality with stylish design.

The GE JV356 is a 30-inch model, ideal for compact spaces while still providing an impressive cooking capacity. It features a traditional oven with a clean design that seamlessly integrates into any kitchen décor. The JV356 is equipped with a self-cleaning function, which takes the hassle out of maintaining an immaculate oven. This model also comes with four powerful sealed burners, including a high-BTU burner for quick boiling, making meal preparation efficient and speedy. The continuous griddle feature allows home cooks to easily maneuver pots and pans across the cooking surface, enhancing convenience.

On the other hand, the GE JV656 36 is designed for those who want a larger cooking surface. The 36-inch range allows for more burners and features, catering to cooks who may require additional capacity for larger families or entertaining. This model boasts six sealed burners, providing optimum cooking flexibility. Furthermore, the JV656 includes a dual oven feature, allowing simultaneous cooking at different temperatures, perfect for elaborate meals. Both models are equipped with advanced technologies that optimize cooking performance. Features such as air fry modes, convection cooking, and precision temperature control ensure that every meal is cooked to perfection.

In terms of energy efficiency, both the JV356 and JV656 models adhere to modern standards, utilizing innovative insulation and control technologies that minimize energy waste while boosting performance. Additionally, their sleek, stainless steel finishes not only enhance their aesthetic appeal but also resist smudging and staining.

With their commitment to user-friendly design and advanced cooking technologies, the GE JV356 30 and JV656 36 are perfect for home chefs who value quality, versatility, and reliability in their kitchen appliances. Whether preparing everyday meals or hosting festive gatherings, these ranges are engineered to elevate the cooking experience. Overall, GE continues to push the boundaries of kitchen technology, making mealtime more enjoyable and efficient for everyone.