JKP55BM/CM/WM
GE® 27" Built-In Double Wall Oven
Dimensions and Installation Information (in inches)
KW Rating
240V | 6.8 |
208V | 5.1 |
Breaker Size | |
240V | 30 Amps |
208V | 30 Amps |
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Suitable bracing to support runners
C |
L |
18"
Over centerline
of cabinet
(must support 300 lbs.)
2" x 4" or equivalent runners
Locate | 10 |
junction box |
|
for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor
Access
from adjacent
cabinet D required
Locate junction box for 24"models 56" MIN. above cutout floor
Allow 3/4"
A for overlap over all edges of cutout
C
B
G
Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or openings are covered.
Cabinet | 27" |
A – Cabinet width required | 27" min. |
B – Minimum cabinet depth |
E |
2" X 4" or |
Conduit
21
Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
| C – Opening width | 25" min. - |
| D – Opening height | |
| E – Recommended minimum cutout location from floor | |
| Oven |
|
| F – Overall depth* | |
| G – Overall height with trim | |
| Overall height without trim | 51" |
| H – Overall width |
*Depth including door handle is approximately
Minimum | equiv. runners | |
(cutout floor) | ||
cutout location | ||
| ||
from floor |
|
F
21" MIN. door opening allowance
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 1/07 | 320368 |