JKP70SM
GE® 27" Built-In Single Convection Wall Oven
Dimensions and Installation Information (in inches)
KW Rating
240V | 3.4 |
|
|
208V | 2.6 |
|
|
Breaker Size | |
|
|
240V | 20 Amps |
|
|
208V | 20 Amps |
10
Locate junction box either 5" MIN. below cutout floor or 44" MIN. above cutout floor
Access from
A | Allow 3/4" |
| |
| for overlap |
| over all edges |
| of cutout |
B MIN.
Note: These ovens are not approved for stackable or
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Note: For 27"
Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Suitable bracing to support runners
C |
L |
18"
Over centerline
of cabinet
(must support 275 lbs.)
adjacent D cabinet required
Minimum
cutout location
(Minimum |
|
from floor when | 2" x 4" |
installed below | or equiv. |
microwave oven) | runners |
2" x 4" or equivalent runners
G
F
E
C MIN.
Conduit 48-1/2" long
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Cabinet | 27" | |
| A – Cabinet width required | 27" min. |
| B – Minimum cabinet depth | |
| C – Opening width | 25" min. - |
| D – Opening height | |
| Oven |
|
| E – Overall depth* | |
| F – Overall height with trim | |
| Overall height without trim | 29" |
| G – Overall width |
*Depth including door handle is approximately
Listed by Underwriters Laboratories
Specification Revised 10/07 | 320434 |