Deck Dubbing
(From AUX or DVD or VCR to Tape)
1.Turn FUNCTION (source) to select the audio source (AUX, DVD, or VCR) to be recorded. If necessary, press ANALOG/DIGITAL SELECT to select ANALOG.
2.Play back the source (AUX, DVD, or VCR).
3.Operate the deck for recording. Audio signals from the selected audio source can be dubbed to TAPE OUT.
Note: When the deck dubbing is performed, be sure to use TAPE OUT (analog audio output).
OSD Function
During the operation (except the Sirius operation), the OSD system places messages at the lower third of the video display screen whenever the volume, input source, surround mode or tuner frequency of any of the configuration settings are changed. The message appears for about 5 seconds.
43