STANDBY
SURROUND
ENTER
It is important to perform speaker configuration prior to using the surround sound decoder. It is possible to receive
Note: When no action is taken for 5 seconds, the Speaker Setup mode will be cancelled.
Size of Speakers
1.Press STANDBY/ON to turn the unit on.
2.Press SURROUND and select a surround mode for 6.1 channel (such as DOLBY PRO LOGIC IIx MUSIC or MOVIE, etc).
3.Press SET UP. SPEAKER SIZE appears on the front panel’s display.
4.Press ENTER. FRONT SPEAKER appears on the front panel’s display.
5.Press ENTER. FRONT LARGE or FRONT SMALL appears on the display.
LARGE: Set to LARGE if your speaker can handle full frequency range (including lower than 100 Hz). For example, if your speaker’s frequency response is 20
SMALL: Set to SMALL if your speaker cannot handle lower than 120 Hz. For example, if your speaker’s frequency response is 120
45