GE SCA1000 Charcoal filter JX81A, To remove the charcoal filter, Filler Panel Kits, Filter Kits

Page 40

Care and Cleaning

www.geadvantium.com

Charcoal filter (JX81A)

The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB2X9883 from your GE supplier.

If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.

The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6 to

12 months, depending on usage).

To remove the charcoal filter

To remove the charcoal filter, first disconnect power at the main fuse.

Remove the top grille by removing the 2 screws that hold it in place.

You may need to open the cabinet doors to remove the screws.

Slide the filter towards the front of the oven and remove it.

Remove 2 grille screws to

remove the grille.

To install the charcoal filter

Optional kits

To install a new filter, remove plastic and other outer wrapping from the new filter.

Insert the filter into the top opening of the oven as shown maneuvering it behind the plastic grille until it fits squarely into place.

It will rest at an angle behind the plastic grille on two side support tabs and in front of the right rear tab. Replace the grille and 2 screws. Reconnect power at the main fuse.

Available at extra cost from your GE supplier.

Filler Panel Kits

■JX40WH—White

■JX41—Black

When replacing a 36″ range hood, filler panel kits fill in the additional width to provide a custom built-in appearance.

For installation between cabinets only; not for end-of-cabinet installation. Each kit contains two 3″ wide filler panels.

Filter Kits

■JX81A—Recirculating Charcoal Filter Kit

Filter kits are

JX81A

 

used when

 

the oven

 

cannot be

 

vented to

 

the outside.

 

See back

 

cover to order

JX40, JX41

by phone or at

 

ge.com.

 

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Problem Solver . . . . . . . . . .41 Possible exposure toImportant Safety Instructions Safety Precautions CLEAR/OFF pad and correct the problem ArcingFoods Microwave- safe cookware Follow these guidelinesSafety Precautions What is Advantium? Getting to know AdvantiumSet the clock Advantium Quick StartBegin speedcooking Microwaving with Micro ExpressUsing the Warming feature Using the Oven/Bake featureTemperature Display prompts Pre-set speedcook menu selections Speedcook Menu GuideOven Features Oven featuresCooking controls SpeedcookSpeedcooking Using speedcook featuresTo use a pre-set speedcook menu Resume feature Cooking tips for great tasting resultsRepeat last To ensure consistent and even browningSpeedcook power level Manual speedcook Speedcook cookwareBe sure to select a size that will rotate easily Speedcook recipe-to find and use Speedcook recipe-to enter and saveTo find and use stored custom speedcook recipes Speedcook recipe-to adjust or change To adjust or change stored custom speedcook recipesSpeedcook recipe-to delete To delete stored custom speedcook recipesThings that are normal during speedcooking Baking BakingBake with preheat Bake without preheatWarming and Reheating WarmingUsing the microwave features MicrowavingTimed Reheat BaconTime Cook How to use pre-set microwave selectionsMicro Express Microwave power level Cooking tipsMicrowave recipe-to enter and save Microwave recipe-to find and useMicrowave recipe-to adjust or change To adjust or change stored custom microwave recipesMicrowave recipe-to delete To delete stored custom microwave recipesPower level is automatically set at Auto defrostTime defrost Conversion GuideDefrosting tips Microwave sensor cooking Microwave Sensor ProgramsTo use all sensor programs WARM/REHEATAre normal Things thatSounds Features under Options button Other Advantium FeaturesReview Micro Power Vent Fan My Recipes HelpMicrowave Micro ExpressTimer To pause, press TIMER. To restart, press Timer againChild lockout Surface light Vent fan Use to light your cooktopReminder Automatic fanCare and Cleaning How to clean the insideHelpful hints Removable oven rack turntableBaking sheets cooking trays Glass microwave trayHow to clean the outside Removing and cleaning the filters Cooktop lightNight light Reusable ventTo install the charcoal filter Optional kits Charcoal filter JX81ATo remove the charcoal filter Filler Panel KitsTroubleshooting Questions? Use this problem solver Locked appearsAdvantium Oven Warranty Warrantor General Electric Company. Louisville, KYSchedule Service Consumer Support

SCA1001, SCA1000 specifications

The GE SCA1000 and SCA1001 are advanced sensors designed specifically for high-performance applications, particularly in the fields of industrial automation and control. These microelectromechanical systems (MEMS) sensors are renowned for their high accuracy, rapid response times, and robust design, making them suitable for a wide array of uses, including robotics, automotive systems, and process automation.

One of the standout features of the SCA1000 and SCA1001 is their ability to measure angular velocity and linear acceleration. This dual functionality allows them to provide comprehensive motion sensing capabilities in a single device. The advantages include reduced system complexity and improved integration, as fewer components are needed to achieve similar sensitivity levels.

Both sensors utilize high-quality MEMS technology, which offers several technical benefits. MEMS sensors are known for their small size, light weight, and low power consumption. This efficiency is particularly advantageous in mobile and portable applications where battery life is crucial. The sensors feature a digital output, making them easy to interface with microcontrollers and digital signal processors, and ensuring seamless communication within modern electronic systems.

In terms of performance, the SCA1000 and SCA1001 provide precise measurements across a wide range of operational conditions. With high resolution and low noise characteristics, these sensors can capture subtle changes in motion, which is essential for applications requiring fine precision. They are also designed to operate effectively in various environmental conditions, boasting high resistance to shock and vibration, further enhancing their reliability in demanding situations.

The characteristic design of the SCA1000 and SCA1001 also includes built-in temperature compensation. This feature ensures that their performance remains stable across fluctuating temperatures, which can be a critical requirement in many industrial processes. The ability to maintain accuracy under different temperature conditions enhances the overall applicability of these sensors.

Another important aspect of these sensors is their scalability. The SCA1000 and SCA1001 series can be utilized in both small-scale applications and large-scale systems, making them a versatile choice for engineers and designers. This scalability is accompanied by a range of customizable options that allow for specific tuning to meet unique application requirements.

In summary, GE's SCA1000 and SCA1001 sensors are cutting-edge solutions that offer exceptional performance, robust design, and versatile application capabilities. Their MEMS technology provides high accuracy and low power consumption, while features like built-in temperature compensation ensure reliable operation in any environment. As industries continue to evolve towards more automated and precise systems, the demand for advanced sensing solutions like the SCA1000 and SCA1001 is expected to grow significantly.
Top Page Image Contents