GE SCA1001, SCA1000 owner manual Safety Precautions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

www.geadvantium.com

WARNING! To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy:

SAFETY PRECAUTIONS

■Read all instructions before using this appliance. When using electrical appliances, basic safety precautions should be followed, including the following:

■Read and follow the specific precautions in the PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY section on page 2.

■Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

■Install or locate this appliance only in accordance with the provided installation instructions.

■Some products such as whole eggs and sealed containers—for example, closed jars—are able to explode and should not be heated in this oven. Such use of the oven could result in injury.

■Do not mount this appliance over a sink.

■This oven is not approved or tested for marine use.

■This oven is UL listed for installation over electric and gas ranges.

■This oven was designed for use over ranges no wider than 36 inches. It may be installed over both gas and electric cooking equipment.

■Do not operate this appliance if it has a damaged power cord or plug, if it is not working properly, or if it has been damaged or dropped. If the power cord is damaged, it must be replaced by General Electric Service or an authorized service agent using a power cord available from General Electric.

■As with any appliance, close supervision is necessary when used by children.

■Use this appliance only for its intended use as described in this manual.

■Do not use corrosive chemicals or vapors in this appliance.

■This oven is specifically designed to heat, dry or cook food, and is not intended for laboratory or industrial use.

■This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair or adjustment.

■Do not cover or block any openings on the appliance.

■Do not store this appliance outdoors. Do not use this product near water— for example, in a wet basement, near a swimming pool, near a sink or in similar locations.

■Keep power cord away from heated surfaces.

■Do not immerse power cord or plug in water.

■See door surface cleaning instructions in the Care and Cleaning of the Oven section of this manual.

■To reduce the risk of fire in the oven cavity:

–Do not overcook food. Carefully attend appliance when paper, plastic or other combustible materials are placed inside the oven while cooking.

–Remove wire twist-ties and metal handles from paper or plastic containers before placing them in the oven.

–Do not use the oven for storage purposes. Do not leave paper products, cooking utensils or food in the oven when not in use.

–If materials inside the oven ignite, keep the oven door closed, turn the oven off and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. If the door is opened, the fire may spread.

–Do not use the Sensor Features twice in succession on the same food portion. If food is undercooked after the first countdown, use TIME COOK for additional cooking time.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Possible exposure to Problem Solver . . . . . . . . . .41Important Safety Instructions Safety Precautions Arcing CLEAR/OFF pad and correct the problemFoods Follow these guidelines Microwave- safe cookwareSafety Precautions Getting to know Advantium What is Advantium?Microwaving with Micro Express Set the clockAdvantium Quick Start Begin speedcookingUsing the Oven/Bake feature Using the Warming featureTemperature Speedcook Menu Guide Display prompts Pre-set speedcook menu selectionsOven features Oven FeaturesSpeedcook Cooking controlsUsing speedcook features SpeedcookingTo use a pre-set speedcook menu To ensure consistent and even browning Resume featureCooking tips for great tasting results Repeat lastSpeedcook power level Speedcook cookware Manual speedcookBe sure to select a size that will rotate easily Speedcook recipe-to enter and save Speedcook recipe-to find and useTo find and use stored custom speedcook recipes To delete stored custom speedcook recipes Speedcook recipe-to adjust or changeTo adjust or change stored custom speedcook recipes Speedcook recipe-to deleteThings that are normal during speedcooking Bake without preheat BakingBaking Bake with preheatWarming Warming and ReheatingBacon Using the microwave featuresMicrowaving Timed ReheatHow to use pre-set microwave selections Time CookMicro Express Microwave recipe-to find and use Microwave power levelCooking tips Microwave recipe-to enter and saveTo delete stored custom microwave recipes Microwave recipe-to adjust or changeTo adjust or change stored custom microwave recipes Microwave recipe-to deleteConversion Guide Power level is automatically set atAuto defrost Time defrostDefrosting tips Microwave Sensor Programs Microwave sensor cookingWARM/REHEAT To use all sensor programsThings that Are normalSounds Other Advantium Features Features under Options buttonReview Micro Express Micro Power Vent Fan My RecipesHelp MicrowaveUse to light your cooktop TimerTo pause, press TIMER. To restart, press Timer again Child lockout Surface light Vent fanAutomatic fan ReminderRemovable oven rack turntable Care and CleaningHow to clean the inside Helpful hintsGlass microwave tray Baking sheets cooking traysHow to clean the outside Reusable vent Removing and cleaning the filtersCooktop light Night lightFiller Panel Kits To install the charcoal filter Optional kitsCharcoal filter JX81A To remove the charcoal filterTroubleshooting Locked appears Questions? Use this problem solverWarrantor General Electric Company. Louisville, KY Advantium Oven WarrantyConsumer Support Schedule Service

SCA1001, SCA1000 specifications

The GE SCA1000 and SCA1001 are advanced sensors designed specifically for high-performance applications, particularly in the fields of industrial automation and control. These microelectromechanical systems (MEMS) sensors are renowned for their high accuracy, rapid response times, and robust design, making them suitable for a wide array of uses, including robotics, automotive systems, and process automation.

One of the standout features of the SCA1000 and SCA1001 is their ability to measure angular velocity and linear acceleration. This dual functionality allows them to provide comprehensive motion sensing capabilities in a single device. The advantages include reduced system complexity and improved integration, as fewer components are needed to achieve similar sensitivity levels.

Both sensors utilize high-quality MEMS technology, which offers several technical benefits. MEMS sensors are known for their small size, light weight, and low power consumption. This efficiency is particularly advantageous in mobile and portable applications where battery life is crucial. The sensors feature a digital output, making them easy to interface with microcontrollers and digital signal processors, and ensuring seamless communication within modern electronic systems.

In terms of performance, the SCA1000 and SCA1001 provide precise measurements across a wide range of operational conditions. With high resolution and low noise characteristics, these sensors can capture subtle changes in motion, which is essential for applications requiring fine precision. They are also designed to operate effectively in various environmental conditions, boasting high resistance to shock and vibration, further enhancing their reliability in demanding situations.

The characteristic design of the SCA1000 and SCA1001 also includes built-in temperature compensation. This feature ensures that their performance remains stable across fluctuating temperatures, which can be a critical requirement in many industrial processes. The ability to maintain accuracy under different temperature conditions enhances the overall applicability of these sensors.

Another important aspect of these sensors is their scalability. The SCA1000 and SCA1001 series can be utilized in both small-scale applications and large-scale systems, making them a versatile choice for engineers and designers. This scalability is accompanied by a range of customizable options that allow for specific tuning to meet unique application requirements.

In summary, GE's SCA1000 and SCA1001 sensors are cutting-edge solutions that offer exceptional performance, robust design, and versatile application capabilities. Their MEMS technology provides high accuracy and low power consumption, while features like built-in temperature compensation ensure reliable operation in any environment. As industries continue to evolve towards more automated and precise systems, the demand for advanced sensing solutions like the SCA1000 and SCA1001 is expected to grow significantly.
Top Page Image Contents