Important Points for Your Roaster Oven

16915407ESM1.qxd 5/10/07 11:17 AM Page 5

PREPARING YOUR ROASTER OVEN FOR USE

1.Remove all packaging materials.

2.Wash the Cooking Pan, Roasting Rack and Lid in hot, soapy water using a sponge or wash cloth. Rinse thoroughly.

3.The outside of the Roaster Oven Body may be cleaned with a soft cloth and warm soapy water. Wipe dry. Do not use abrasive cleaners. Do not immerse the Roaster Oven Body in water.

NOTE: Due to manufacturing process, some smoke and odor may be noticed during the first use. This should disappear after the first heating of the Roaster Oven.

IMPORTANT POINTS FOR YOUR

ROASTER OVEN

•Always use the Cooking Pan in the Roaster Oven when cooking. NOTE: Never place food or liquid directly into the Roaster Oven Body.

•Caution should be used when removing the Lid so that the steam escapes away from you.

•Avoid the Steam Vents when removing or lifting the Lid.

•Significant amounts of heat escape whenever the Lid is removed; therefore the cooking time must be extended. Avoid frequent removal of the Lid for checking cooking progress or stirring.

•To use Lid Rest feature, hold the Lid upright by the Handle and place the edge of the Lid under the tabs just above either Side Handle.

•Convenience foods can be baked in the Roaster Oven. Place container on Roasting Rack. Follow package directions.

•Meats roasted in your Roaster Oven will be moist and tender. For additional browning, brush oil or butter over the meat before cooking.

•To create a darker roasted, crispier skin on poultry, do not add liquids (with the exception of the basting butter or oil) until there are only 30 minutes left of cooking.

NOTE: The roaster pan has a capacity of 17 quarts.

IMPORTANT POINTS FOR YOUR

BUFFET SERVER

CAUTION: Temperature of foods should be kept at 150ºF or above.

•All Serving Dishes need to be in place when using the Buffet Server.

•Use only to keep cooked foods warm.

•Serving Dishes, Buffet Server Frame are not to be used on the stove top, in an oven or in a microwave oven.

•When filling Serving Dishes with foods that may stick, spray the inside with a non-stick cooking spray.

•If food is dry, add broth or juice to help keep warm.

•NEVER pick-up hot serving dishes using the frame.

HOW TO USE YOUR ROASTER OVEN

1.Place the Cooking Pan into the Roaster Oven Body.

2.Make sure that the Temperature Control is in the OFF position, then plug Cord into a 120 volt AC outlet .

3.Turn the Roaster on by turning the Temperature Control to the desired temperature.

4.Preheat for 15 to 20 minutes. (Indicator Light will shut off when temperature is reached.)

5.Place Roasting Rack into the Cooking Pan, put food on the Rack, and place the Lid on the Roaster Oven. NOTE: Some foods or recipes do not require the Roasting Rack to be used.

6.When finished, turn the Temperature Control to the OFF position and unplug Roaster Oven from outlet .

7.Remove Lid and using oven mitts, remove the Roasting Rack with food and serve.

HOW TO USE YOUR BUFFET SERVER

1.Prior to use wash all Serving Dishes and Buffet Server Frame with warm soapy water.

2.Fill the removable cooking pan from your Roaster Oven with 8 Qts. of water (or 1⁄ 2 - 3⁄ 4 full) and place inside Roaster Oven Body.

Caution: Never add water directly inside the Roaster Oven Body.

3.Place Buffet Server Frame on top of the cooking pan. Make sure the frame is secure and level.

4.Add empty Serving Dishes, making sure they are also secure.

5.Cover with Roaster Oven Lid and plug roaster into a 120V outlet . Preheat on 350ºF for 30 minutes or until water is very hot .

6.Uncover and carefully add hot, cooked food into Serving Dishes.

7.Cover and turn control to 250ºF setting to keep foods warm. If necessary, adjust temperature.

8.Stir occasionally and keep food covered to maintain temperature.

9.Periodically check and carefully add more hot water if necessary.

HOW TO CLEAN YOUR BUFFET SERVER

CAUTION: Buffet Server is hot . Handle Carefully.

•Always allow the Buffet Server to completely cool before cleaning.

•Serving Dishes and Frame from Buffet Server may be cleaned in hot soapy water or in dishwasher. Rinse and dry completely. NOTE: Steel wool, abrasive cleaners, or metal scouring pads may be used if necessary.

HOW TO CLEAN YOUR ROASTER OVEN

CAUTION: Do not immerse the Roaster Oven Body in water or other liquid. Do not put Cooking Pan in dishwasher.

1.Turn Temperature Control to the OFF position.

2.Unplug the Roaster Oven from outlet and allow unit to cool.

3.Wash the Cooking Pan, Lid and Roasting Rack in hot soapy water – using a sponge or cloth. Rinse thoroughly in hot water, then towel dry.

4.Wipe the inside and outside of the Roaster Oven Body with a damp cloth.

681131691543 specifications

The GE 681131691543 is a cutting-edge electrical device renowned for its advanced features and robust design. Built with a focus on reliability and efficiency, this model caters to a wide range of industrial and commercial applications.

One of the standout characteristics of the GE 681131691543 is its high performance in demanding environments. It is engineered to withstand extreme temperatures and harsh conditions, making it suitable for outdoor installations and industrial settings. The device adheres to stringent quality control standards, ensuring exceptional durability and longevity.

A key feature of the GE 681131691543 is its energy efficiency. This model incorporates advanced technologies aimed at reducing energy consumption and operational costs. By employing variable frequency drives and smart control algorithms, the device optimizes energy use without compromising performance. This not only benefits the environment but also helps organizations reduce their carbon footprint.

The GE 681131691543 also boasts versatility in functionality. It is compatible with a wide array of existing systems and can be integrated into various industrial frameworks with ease. Its user-friendly interface allows for straightforward configuration and management, enabling technicians to quickly adapt settings to meet specific operational needs.

Another notable technology integrated into the GE 681131691543 is connectivity. This model is equipped with advanced communication protocols that facilitate real-time monitoring and data exchange. Users can access critical information remotely, enabling proactive maintenance and quicker response times in case of issues. This connectivity feature also allows for easy integration into IoT platforms, broadening its application scope.

Furthermore, the GE 681131691543 prioritizes safety. It includes numerous safety features such as overload protection, short circuit protection, and advanced fault diagnostics. These mechanisms ensure that the device operates within safe parameters, significantly reducing the risk of failure or accidents.

In terms of maintenance, the GE 681131691543 is designed for ease of access and servicing. It features modular components that can be easily replaced or upgraded, minimizing downtime and maintaining operational efficiency.

In summary, the GE 681131691543 is a high-performance electrical device that combines durability, energy efficiency, and advanced technologies to meet the needs of modern industrial applications. With its versatile functionality, robust safety features, and ease of integration, it stands out as a reliable choice for businesses looking to enhance their operational capabilities.