GE PK916SM Undercounter Dimensions and Installation Information, Standard Burner Gas Cooktop

PK916SM

GE Profile™ 27" Built-In Single Convection Wall Oven

Undercounter Dimensions and Installation Information

			Gas or electric cooktops may be
Note: Oven is rated for use only under 30”			installed over this oven. See cooktop
			installation instructions for cutout size.			240V / 208V
standard or sealed burner gas and selected			See label on top of oven for approved
30” CleanDesign and Calrod® electric cooktops.			cooktop models.			Junction Box
						Location
Cabinets installed adjacent to wall ovens must	Sealed Burner Gas Cooktop		25				5
have an adhesion spec of at least a 194°F
temperature rating.
Electric wall ovens are not approved for					25" MIN.
installation with a plug and receptacle.		5" To center of 2" diameter
They must be hard wired in accordance		hole from countertop			25 1/4" MAX.	Allow 1"
with installation instructions.				27 5/8" MIN.		unit overlap
	90° Street el					all edges
				28 1/8" MAX.

Installation Information: Before installing,	°	Elbow	2" Diameter hole (20-7/8"
consult installation instructions packed with	45		from front of countertop
			to hole center)
product for current dimensional data.	Cabinet sides

Gas or electric connections for gas cooktop must be located in an adjacent accessible location to the right

22" MIN.	36"
Above	Typical
Support	Countertop
Platform	Height

24

Standard Burner Gas Cooktop

3/4" Support Platform Required

90° Street el 45° Elbow

Cabinet sides

3-7/16" To center of 2" diameter		Must Support 150 Lbs.
	hole from countertop

2" MIN. diameter hole (23-1/4" from front surface of countertop)

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 10/07 220363