3.Remove the locking nut and flat washer (Figure 3) from the fence lock handle bolt (Figure 4), place the fence assembly over the jointer tables and fence bracket, and insert the bolt through the fence bracket slot, making sure the carriage fits over the key (Figure 3).
Key | Carriage |
Flat Washer
Locking Nut
Figure 3. Fence locking nut and washer
removed.
4.Secure the fence lock handle bolt with the locking nut and flat washer removed in Step 3, as shown in Figure 4, and final tighten the fence bracket.
Flat Washer |
Locking Nut |
Fence Lock |
Handle Bolt |
Figure 4. Fence installed.
5.Install the round-slotted handwheel onto the right shaft with the 4 x 4 x 12 key, and install the square-slotted handwheel onto the left shaft, using the cap screws and flat washers already mounted on the handwheel shafts.
Square Slotted | Round Slotted | |
Handwheel | ||
Handwheel | ||
|
