Grizzly G0656X Inventory

G0656 8" Jointer with Built-In Mobile Base -11-

Inventory

The following is a description of the main comp o-

nents shipped with your machine. Lay the compo-

nents out to inventory them.

Note: If you can't find an item on this list, check

the mounting location on the machine or examine

the packaging materials carefully. Occasionally

we pre-install certain components for shipping

purposes.

Wood Crate: (Figure 3) Qty

A. Jointer Assembly ........................................1

B. Cutterhead Guard .......................................1

C. Handwheels ................................................2

D. Handles ......................................................2

E. Fence Tilt Lever ......................................... 1

F. Push Blocks ................................................2

G. Knife Setting Gauge Hardware Bag

— Knife Setting Gauge Rod ........................1

— Knife Setting Gauge Foot .......................2

— E-Clip 8mm .............................................2

H. Tool Hardware Bag

— Hex Wrenches 2.5, 3, 4, 6mm ......1 Each

—Open-end Wrench 8/10, 12/14mm .........1

Cardboard Box: (Figure 4) Qty

I. Stand Assembly w/Motor and Door ........... 1

J. Pedestal Switch ..........................................1

K. Wheel Assembly .........................................1

L. V-Belt ..........................................................1

M. Dust Port ...................................................1

Assembly Fasteners Qty

• Hex Bolt M8-1.25 x 50 (Wheel/Stand) .......1

• Flat Washer 8mm (Wheel/Stand) ...............1

• Hex Bolts M10-1.5 x 55 (Wheel/Stand) ......2

• Flat Washers 10mm (Wheel/Stand) ...........2

• Hex Nuts M10-1.5 (Wheel/Stand) ..............2

• Cap Screws M8-1.25 x 50 (Jointer/Stand) .3

• Flat Washers 8mm (Jointer/Stand) ............6

• Lock Washers 8mm (Jointer/Stand) ...........3

• Hex Nuts M8-1.25 (Jointer/Stand) ..............3

• Flat Washers 6mm (Handwheels) ..............2

• Cap Screws M6-1 x 12 (Handwheels) .......2

• Set Screw M5-.8 x 12 (Cutterhead Guard) 1

• Cap Screws M8-1.25 x 25 (Pedestal) ........2

• Lock Washers (Pedestal) ...........................2

• Flat Washers (Pedestal) .............................2

• Phillips Head Screws

M5-.8 x 16 (Dust Port) ................................4

• Flat Washers 5mm (Dust Port) ..................4

• Cap Screws M8-1.25 x 25 (Fence Suppt.) .4

• Flat Wshers 8mm (Fence Support) ............4

• Lock Washers 8mm (Fence Supptort) .......4

In the event that any nonproprietar y parts are

missing (e.g. a nut or a washer), we would be

glad to replace them, or for the sake of expedi-

ency, replacements can be obtained at your local

hardware store.

Figure 3. Box 1 inventory contents.

Figure 4. Box 2 inventory contents.

SUFFOCATION HAZARD!

Immediately discard all plas-

tic bags and packing materi-

als to eliminate choking/suf-

focation hazards for children

and animals.