GE ZDIS15, ZDI15 owner manual To reverse the door

Page 18

Reversing the Door Swing

Icemaker

To reverse the door

TOOLS NEEDED: 516″ wrench, 14″ wrench, flat putty knife, Phillips screwdriver

Parts Supplied:

Four plug buttons

Parts Identification: (For Reference Only)

Hinge Pin

Handle Screw

5/16Hex Head

Endcap Screw

Hinge Screw

 

IMPORTANT: Before you begin, unplug the icemaker or disconnect power.

To remove door from hinges:

1. Remove the handle screws and lift off the handle (on some models). Keep the parts together and set them aside.

2.Remove the hinge pin from the top hinge.

3.Lift the door off of the bottom hinge.

Place the hinge pin back into the top hinge.

4.Reverse the door endcaps as follows:

•Remove the screws and endcaps from the door, top and bottom.

•Place the top endcap on the bottom of the opposite side of the door with the long flat side facing the door front.

•Place the bottom endcap on the top of the opposite side of the door with the long flat side facing the door front.

5. Set the door aside.

Top Hinge

Hinge Pin

Hinge Sleeve/

Door Stop

To reverse the hinges:

1.Using a flat putty knife, remove the plug buttons from the screw holes opposite of the door hinges, top and bottom. Set aside.

2.Remove the two screws holding the top hinge. Turn the hinge upside down so that the hinge pin points up. Place the hinge on the opposite side at the bottom of the door.

3.Remove the plastic hinge sleeve from the “old” bottom hinge and replace it on the new bottom hinge pin.

4.Remove the bottom hinge. Turn the hinge upside down so that the hinge pin points down. Place the hinge on the opposite side at the top of the door.

5.Push the plug buttons into the original screw holes.

6.Remove the top hinge pin.

Top Hinge

Bottom Hinge

Bottom Hinge

Hinge

Plugs

Hex Head Hinge Screw

Plugs

Hinge Sleeve/

Door Stop

Hinge

Hinge Pin

18

Hex Head Hinge Screw

Image 18
Contents GE Monogram ZDI15 and ZDIS15 Automatic Icemaker Introduction ContentsBefore using your icemaker Write down the model & serial numbersIf you need service If you received a damaged icemakerRead and Save These Instructions Lire ET Conserver CES Instructions HOW to Connect Electricity Raccordement ÉlectriqueCFC Disposal SE Débarrasser DU CFCUSE of Extension Cords Cordons ProlongateursConservez CES Directives Clean before using Set controls Remove packagingFeatures of your icemaker How your icemaker works Making IceExterior surfaces Unplug the icemaker before cleaningCaring for your icemaker Icemaker systemCondenser Dirty or clogged condenserInterior Light bulb replacement Vacation and movingTo shut down the icemaker Front leveling legs PreparationTo reverse the door To replace door on hinges To reverse the door catchProblem Solver Questions?Registration Ownership Product Consumer Consumer Product Ownership Registration GE Answer Center Your Monogram Icemaker Warranty From the Date Original Purchase

ZDI15, ZDIS15 specifications

General Electric (GE) has been a pioneering force in various technological innovations, and the GE ZDIS15 and ZDI15 Z-Wave devices exemplify their commitment to smart technology solutions. Designed for advanced monitoring and control applications, these devices offer a range of features that enhance the performance of electrical systems.

The GE ZDIS15 is a smart device that integrates seamlessly into home and industrial environments. One of its main features is its ability to communicate using Z-Wave technology, which enables wireless communication between devices. Z-Wave is a widely adopted protocol for home automation, known for its reliability, low power consumption, and long-range capabilities. This means users can control their electrical systems remotely, switching devices on and off, or programming schedules for optimal energy usage.

The ZDI15 takes this a step further by adding advanced monitoring capabilities. It allows users to keep track of electrical consumption, providing insights into usage patterns and helping to identify energy-saving opportunities. This device is equipped with real-time monitoring, enabling users to receive updates and alerts about power consumption levels, which can significantly aid in managing energy costs.

One of the standout characteristics of both devices is their user-friendly interface. GE has ensured that the setup process is straightforward, allowing users of all technical backgrounds to integrate these devices into their existing systems effortlessly. The accompanying mobile application provides an intuitive dashboard for monitoring device status, setting automation rules, and receiving notifications.

In addition to smart control and monitoring, both devices feature strong security protocols to protect user data and prevent unauthorized access. GE has integrated end-to-end encryption, ensuring that communications between devices remain secure. This is particularly important as more consumers prioritize privacy in their smart home solutions.

Durability and reliability are also hallmarks of the GE ZDIS15 and ZDI15. Designed to withstand various environmental conditions, both devices are built with high-quality materials to ensure longevity. Their compact design allows for easy installation in various locations, making them versatile for different applications.

In summary, the GE ZDIS15 and ZDI15 are advanced Z-Wave devices that offer smart control, energy monitoring, and robust security features. As part of GE’s commitment to innovation and efficiency, these devices stand out for their technological capabilities, ease of use, and reliability, making them ideal choices for modern energy management in residential and commercial settings. With the integration of these smart devices, users can enhance their energy efficiency and contribute to a more sustainable future.