GE TAX4, SC4 warranty Push

Page 8

REVERSING THE DOOR SWING

(continued)

Replace the two screws in the other side of the case bottom.

Replace the bottom hinge on the same side as the top door pin.

Before tightening the hinge screws, check the gasket. Look at it from both sides to make sure it contacts the cabinet evenly from top to bottom. Push it in if necessary. Also check to insure the door opens and closes without interference. If necessary adjust the position of the bottom hinge.

PUSH

Replace both leveling legs and tighten the hinge screws.

Finished! Enjoy using your refrigerator.

Image 8

Contents UseandCareGuide If YOU Need Service Help US Help YOU…CFC Disposal Read this guide carefullyOperating Your Refrigerator Important Safety InstructionsTemperature Control Dial Care and Cleaning Ice ServiceCleaning Inside-Outside DefrostingWhen You Move When you go on VacationPreparation LocationInstallation Requirements How to Connect ElectricityUse of Adapter Plug Use of Extension CordsReversing the Door Swing To Change the Door Swing DirectionPush QUESTIONS? USE this Problem Solver Problem Possible CauseWe’ll be there Service Contracts Warranty