Reversing the Door Swing

(on some models)

TO CHANGE THE DOOR SWING DIRECTION

Carefully set the refrigerator on its left side.

Remove the leveling leg below the bottom hinge and the leveling leg at the opposite corner.

Bottom Hinge

Leveling Legs

Remove the bottom hinge. Set the door aside. Remove the two screws from the other side of the case bottom.

Bottom Hinge

Remove the three screws that hold the top in place.

Slide back the top just enough to have access to the screws.

Remove the top screw and door pin. Reinstall them on the other side.

Replace the top and three screws.

Washer

On some models the foam slides back with the top.

Washer

Other models have a piece of foam with cut- outs for access to the screws.

Place the door in position on the top door pin.

Replace the plug button on the other side of the door.

(continued next page)