Cool -Touch Electric Skillet

IMPORTANT SAFEGUARDS

In order to prevent the risk of fire, electric shock, burns or other injury or damage, follow these instructions carefully. When using electrical appliances, basic safety precautions should always be followed including the following:

A short power-supply cord is provided to reduce the hazards resulting from entanglement or tripping over a longer cord. AN EXTENSION CORD MAY BE

USED WITH CARE; HOWEVER, THE MARKED ELECTRICAL RATING SHOULD BE AT LEAST AS GREAT AS THE ELECTRICAL RATING OF THE SKILLET. The extension cord should not be allowed to drape over the counter or tabletop

KEEP WARM SETTING: The Temperature Control Probe has a Keep Warm range setting of approximately 160° to 180° F. The indicator light will cycle ON and OFF when this setting is maintaining the desired temperature. NOTE: During initial use of this appliance, some slight smoke and/or odor may be detected. This is normal with many heating appliances and will not recur after a few uses. Only

1.	READ ALL INSTRUCTIONS
	BEFORE USING.
2.	Do not touch hot surfaces. Use
	Handles/Legs Assembly.

8.Do not use outdoors.

9.Do not let Cord hang over edge of table or counter, or touch heated surfaces.

where it can be pulled on by children or unintentionally tripped over.

use with Temperature Control Probe number MPTC-9 or MPTC-9mp.

3.	To protect against electrical shock,
	do not immerse Temperature
	Control Probe, Cord or plugs in
	water or other liquids.
4.	Close supervision is necessary when
	any appliance is used by or near
	children.
5.	Unplug from outlet when not in use

10. Do not place on or near a hot gas

or electric burner, or in a heated

oven.

11. Extreme caution must be used

when moving appliance containing

hot oil or other hot liquids.

12. Always attach Temperature Contol

Probe to appliance first, then plug

Know Your Electric Skillet

Parts and Features

and before cleaning. Allow to cool

before putting on or taking off

parts, and before cleaning the

appliance.

6. Do not operate any appliance with a

damaged Cord or plug or after the

appliance malfunctions or has been

damaged in any manner. Call

Customer Service(see warranty) to

return for examination, repair, or

adjustment.

Cord into the wall outlet. To

disconnect, turn Temperature

Control Dial to OFF, then remove

plug from wall outlet.

13. Do not use appliance for other than

intended use.

14. Be sure Lid Handle is assembled

and fastened properly. See assembly

instructions on page 4, “How to

Assemble Your Electric Skillet”.

Lid

Lid Handle

Transparent Glass Window

Steam Vent

Lid Rest latch

g
Cool-
Touc
	h S
	killet

7. The use of accessory attachments

not recommended by manufacturer

may cause injuries.

6Probe Guard

7Temperature Control Indicator

SAVE THESE INSTRUCTIONS!

Consumer Safety Information

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.

		13
8	Temperature Control Dial	13
8	Temperature Control Dial
			12
9	Cord		12
9	Cord

10 Temperature Control Probe

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not

attempt to modify the plug in any way.

CAUTION: To reduce the risk of electric shock, do not immerse the Electric Skillet in water with the TEMPERATURE CONTROL PROBE attached. No user serviceable parts inside. Do not attempt to service this product.

11	Handles / Legs Assembly

12	Cool-Touch Base

13	Non-Stick Surface

106818, 681131068185 specifications

The GE 681131068185,106818 is a versatile and innovative product that showcases advanced engineering and design tailored for a range of applications. With its robust construction and cutting-edge performance, this model has gained recognition in various industries, delivering both reliability and efficiency.

One of the main features of the GE 681131068185,106818 is its high efficiency, which is crucial for reducing operational costs and energy consumption. This product is engineered with state-of-the-art technology, allowing it to perform optimally under various conditions while minimizing environmental impact. The design focuses on achieving maximum output with minimal waste, making it an eco-friendly choice for businesses.

In terms of technology, the GE 681131068185,106818 incorporates advanced control systems that enhance usability and performance. These systems allow for precise monitoring and adjustments, ensuring that the equipment operates at peak efficiency. The incorporation of smart technology means that users can easily integrate the product into existing systems, improving overall operational workflows.

The characteristics of the GE 681131068185,106818 also include durability and resilience. Constructed from high-quality materials, this model is designed to withstand harsh environments and demanding conditions. Its robust build ensures that it maintains performance over time, reducing maintenance needs and prolonging its lifespan.

Furthermore, the GE 681131068185,106818 is equipped with user-friendly interfaces that simplify operation and monitoring. This focus on ease of use allows operators to quickly gain proficiency, reducing training time and increasing productivity. The intuitive design ensures that users can navigate functions seamlessly, making it an ideal choice for diverse workplaces.

In summary, the GE 681131068185,106818 is a powerful and efficient solution that combines advanced technologies, user-friendly features, and durable construction. Its ability to adapt to various applications makes it a valuable asset for industries seeking both performance and sustainability. With this model, companies can expect enhanced operational efficiency and a commitment to environmental stewardship, solidifying its place in modern engineering.