GE JGRP17 owner manual After a Clean Cycle, Questions and Answers

Page 24

Using the self-cleaning oven.

Safety Instructions

Instructions

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel-wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

NOTES:

■You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

■While the oven is self-cleaning, you can touch the CLOCK pad to display the time of day. To return to the clean countdown, touch the COOKING TIME pad.

■If you have left the shelves in the oven during the self-clean cycle and they become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Operating

Troubleshooting Tips

Customer Service

Questions and Answers

Q. If my oven clock is not set to the correct time of day, can I still self-clean my oven?

A.If the clock is not set to the correct time of day you will not be able to set a delay-clean cycle to end at a specific time.

Q.Can I use commercial oven cleaners on any part of my self-cleaning oven?

A.No cleaners or coatings should be used around any part of this oven. If you do use them and do not thoroughly rinse the oven with water, wiping it absolutely clean afterwards, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.

Q.What should I do if excessive smoking occurs during cleaning?

A.This is caused by excessive soil. Turn the oven off. Open the windows to rid the room of smoke. Wait until the oven has cooled and the words “LOCKED DOOR” are off in the display. Wipe up the excess soil and reset the clean cycle.

Q.Is the “crackling” or “popping” sound I hear during cleaning normal?

A.Yes. This is the sound of the metal heating and cooling during both the cooking and cleaning functions.

Q. Should there be any odor during the cleaning?

A.Yes, there will be an odor during the first few cleanings. Failure to wipe out excessive soil might also cause a strong odor when cleaning.

Q.What causes the hair-like lines on the enameled surface of my oven?

A.This is a normal condition, resulting from heating and cooling during cleaning. These lines do not affect how your oven performs.

Q.Why do I have ash left in my oven after cleaning?

A.Some types of soil will leave a deposit which is ash. It can be removed with a damp sponge or cloth.

Q.My oven shelves do not slide easily. What is the matter?

A.If you have left the oven shelves in the oven during many cleanings, the shelves will lose their luster and become hard to slide. To make shelves slide more easily wipe the shelf supports with cooking oil.

Q.I have left my oven shelves in the oven during the self-clean cycle and they have become gray. Is this normal?

A.Yes. After the self-clean cycle, the shelves will lose some luster and discolor to a deep gray color.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Wall OvenBuilt-In Gas What to do if YOU Smell GAS GE & You, a Service Partnership Two easy ways to register your applianceImportant Safety Notice Safety Precautions Oven Using the oven controls Oven Control, Clock and Timer Features and SettingsUsing the clock and timer TimerHow to Set the Timer ClockPower Failure Tones While Setting the ControlPreheat Notification Tone Special features of your oven control Tones at the End of a Timed CycleHour Shut-Off Cook and HoldFahrenheit or Centigrade Temperature Selection Hour, 24-Hour or Clock Black-OutControl Lockout Changing the Speed of the +/- PadsUsing the oven Shelf Positions Oven MoistureOven Shelves Using the baking feature How to Set Your Oven for BakingOven Shelves PreheatingPan Placement Baking PansCookies PiesTouch the Clock pad How to Set Delay Start and Automatic Stop Adjust the oven thermostat-Do it youself To Adjust the ThermostatType of margarine will affect baking performance Using the roasting feature How to Set Your Oven for RoastingBefore You Begin Roasting… Questions and Answers Roasting GuideUsing the broiling feature How to Set Your Oven for BroilingTroubleshooting Tips Before You Begin Broiling…Broiling Guide Usda Rev. JuneUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning SafetyAfter a Clean Cycle Care and cleaning of the oven Oven Light ReplacementBroiler Pan and Grid Removable Storage DrawerSelf-clean cycle Removable Oven BottomControl Panel To clean the inside of the door To clean the outside of the doorLift-Off Oven Door Adjusting Orifice Hoods Broil and Oven Burner Air Adjustment ShuttersBefore You Call For Service… After a clean cycle Oven not clean after a Clean cycleCrackling or Popping soundPower outage Call for service On outer conesDisplay goes blank Display flashesPage We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Gas Oven Warranty GE Will Replace, At No Charge To YouWhat GE Will Not Cover One YearService Telephone Numbers GE Answer Center

JGRP17 specifications

The GE JGRP17 is a cutting-edge gas turbine engine designed primarily for use in industrial applications, distinguishing itself with a blend of advanced technology and robust performance. This engine is part of GE’s extensive portfolio of gas turbine systems, which are renowned for their efficiency, reliability, and adaptability.

One of the main features of the JGRP17 is its high thermal efficiency, enabling it to convert a greater proportion of fuel energy into usable power. This efficiency is achieved through sophisticated aerodynamic design and advanced materials that withstand high temperatures, resulting in lower fuel consumption and reduced emissions. The engine's modular design also contributes to its high performance, allowing for easier maintenance and reduced downtime during repairs or overhauls.

Another notable characteristic of the JGRP17 is its versatility. It can operate on a variety of fuels, including natural gas and liquid fuels, making it suitable for diverse applications across multiple sectors, from power generation to marine propulsion. The engine is engineered to provide reliable operation in various environmental conditions, ensuring consistent performance regardless of location.

The JGRP17 incorporates advanced control systems that enhance its operational efficiency and reliability. These systems utilize real-time monitoring and data analytics to optimize performance and detect potential issues before they escalate, thereby improving overall safety and operational longevity. These smart technologies are complemented by GE's legacy of engineering excellence, resulting in an engine that not only meets current industry standards but also anticipates future demands.

In addition to technical advancements, the GE JGRP17 is designed with sustainability in mind. Its lower emissions profile is a significant advantage in today’s climate-conscious market, facilitating compliance with stringent environmental regulations. The turbine's efficient performance contributes to reduced carbon footprints, making it an attractive option for companies looking to enhance their sustainability practices.

Overall, the GE JGRP17 gas turbine engine exemplifies the convergence of advanced engineering, efficiency, and environmental responsibility. With its powerful performance, flexible fuel options, and commitment to sustainability, it represents a significant advancement in industrial gas turbine technology, positioning itself as a reliable choice for a variety of energy and propulsion applications in an evolving marketplace.
Top Page Image Contents