GE JVM1790 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS, Electrical Requirements

Page 3
Installation Instructions

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box before beginning the installation to insure that the outlet box is properly grounded. If not properly grounded, or if the outlet box does not meet electrical requirements noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies.

CAUTION: For personal safety, remove house fuse or open circuit breaker before beginning installation to avoid severe or fatal shock injury.

CAUTION: For personal safety, the mounting surface must be capable of supporting the cabinet load, in addition to the added weight of this 63–85 pound (28.5–38.5 kg) product, plus additional oven loads of up to 50 pounds (22.7 kg) or a total weight of 113–135 pounds (51.3–61.2 kg).

CAUTION: For personal safety, this product cannot

be installed in cabinet arrangements such as an island or a peninsula. It must be mounted to BOTH a top cabinet AND a wall.

NOTE: For easier installation and personal safety, it is recommended that two people install this product.

IMPORTANT – PLEASE READ CAREFULLY. FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED TO AVOID SEVERE OR FATAL SHOCK.

You should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

Where a standard two-prong wall receptacle is encountered, it is very important to have it replaced with a properly grounded three-prong wall receptacle, installed by a qualified electrician.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT, DEFORM OR REMOVE ANY OF THE PRONGS FROM THE POWER CORD. DO NOT USE WITH AN EXTENSION CORD.

ELECTRICAL

REQUIREMENTS

Product rating is 120 volts AC, 60 Hertz, 15 amps and

1.5kilowatts. This product must be connected to a supply circuit of the proper voltage and frequency. Wire size must conform to the requirements of the National Electrical Code or the prevailing local code for this kilowatt rating. The power supply cord and plug should be brought to a separate

15 to 20 ampere branch circuit single grounded outlet. The outlet box should be located in the cabinet above the oven. The outlet box and supply circuit should be installed by a qualified electrician and conform to the National Electrical Code or the prevailing local code.

Ensure proper

ground exists

before use

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

3

Image 3
Contents Above the Cooktop Oven BEFORE YOU BEGINREAD CAREFULLY KEEP THESE INSTRUCTIONS Installation InstructionsGeneral information Installation InstructionsCONTENTS Step-by-step installation guideELECTRICAL REQUIREMENTS Installation Instructions IMPORTANT SAFETY INSTRUCTIONSTotal Length Installation Instructions HOOD EXHAUSTOUTSIDE TOP EXHAUST EXAMPLE ONLY OUTSIDE BACK EXHAUST EXAMPLE ONLYFt. or m Exhaust connectionMaximum duct length Total DuctworkHARDWARE PACKET DAMAGE-SHIPMENT/ INSTALLATIONPARTS INCLUDED ADDITIONAL PARTSInstallation Instructions TOOLS YOU WILL NEED MOUNTING SPACEThe depth of the opening cannot be more than 13-1/2” 34.3 cm Installation Instructions 1 PLACEMENT OF THE MOUNTING PLATE A. REMOVING THE OVEN FROM THE CARTON/REMOVING THE MOUNTING PLATEB. FINDING THE WALL STUDS cabinet C. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINETPlate position-beneath flat bottom Plate position-beneath framed recessedSet the mounting plate aside D. ALIGNING THE WALL PLATERECIRCULATING NON-VENTED DUCTLESS INSTALLATION TYPES Choose A, B or COUTSIDE TOP EXHAUST VERTICAL DUCT OUTSIDE BACK EXHAUST HORIZONTAL DUCTTo use toggle bolts INSTALLATION OVERVIEWOUTSIDE TOP EXHAUST Vertical Duct A1. ATTACH THE MOUNTING PLATE TO THE WALLA2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET A3. ASSEMBLE AND INSTALL ADAPTORIMPORTANT Do not grip or use handle during installation A4. MOUNT THE OVENA5. ADJUST THE EXHAUST ADAPTOR A6. CONNECTING DUCTWORKA4. MOUNT THE OVEN continued Installation Instructions B OUTSIDE BACK EXHAUST Horizontal Duct B2. ATTACH THE MOUNTING PLATE TO THE WALLB1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST Openings Facing Up B3. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINETB4. ADAPTING BLOWER FOR OUTSIDE BACK EXHAUST BEFORE Fan Blade7 Place the blower unit back into the opening INSTALL THIS MICROWAVE OVEN B5. MOUNT THE MICROWAVE OVENRECIRCULATING Non-Vented Ductless C1. ATTACH THE MOUNTING PLATE TO THE WALLC2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C3. ADAPTING BLOWER FOR RECIRCULATION C3. ADAPTING BLOWER FOR RECIRCULATION continued C4. MOUNT THE OVENEquivalent to Depth of Cabinet Recess Insert mesh-side down C6. INSTALLING THE CHARCOAL FILTERC5. MOUNT THE OVEN continued Screws Side ScrewINSTALLATION INSTRUCTIONS Installation Instructions BEFORE YOU USE YOUR MICROWAVE06-05 JR 49-40453
Related manuals
Manual 76 pages 59.89 Kb

JVM1790 specifications

The GE JVM1790 is a versatile over-the-range microwave designed to enhance any kitchen with its stylish look and array of features, making it a popular choice among homeowners. This model combines functionality with an efficient space-saving design, ideal for those looking to maximize kitchen space without sacrificing performance.

One of the standout features of the JVM1790 is its 1.7 cubic feet capacity, which provides ample room for larger dishes and multiple cooking needs. The microwave is equipped with 950 watts of cooking power, ensuring food is prepared quickly and evenly. This microwave also features a range of power levels, allowing users to select the ideal power intensity for various cooking tasks.

The JVM1790 is designed with convenience in mind. It includes a convenient turntable that helps to circulate heat evenly, ensuring thorough cooking. The microwave also offers a variety of pre-programmed cooking options, which simplify the cooking process. Users can easily prepare popcorn, defrost meat, or heat up leftover meals with just the push of a button.

In terms of technologies, the GE JVM1790 employs Sensor Cooking controls, which automatically adjust cooking times and power levels for various food types. This feature takes the guesswork out of microwave cooking, helping to achieve optimal results with minimal effort. Moreover, the model includes venting options with two-speed exhaust fans that efficiently eliminate smoke, steam, and odors from the kitchen.

Aesthetically, the JVM1790 is available in several finishes, including stainless steel, which complements modern kitchen designs. The sleek design features a hidden vent and a bright, easy-to-read display, ensuring that it not only performs well, but also adds a touch of elegance to your kitchen.

The JVM1790 also prioritizes user safety with its child lock feature, preventing accidental operation by little hands. Additionally, the built-in lighting illuminates the cooktop below, enhancing visibility during cooking or meal prep.

Overall, the GE JVM1790 offers a blend of reliable performance, modern technology, and practical design. Its combination of power, convenience features, and stylish aesthetics makes it an excellent addition to any kitchen, meeting the diverse needs of busy families and home cooks alike.