GE 3504502P327 Replacing the light bulb, Operating Instructions, Cleaning, Preparing to Move

Page 8

Instructions

Care and cleaning.

In the Event of a Power Failure

Safety

If the power fails, open the door as infrequently as possible to maintain the temperature. A gradual rise in temperature should not have any adverse effect on the wine.

If it is extremely hot, you may want to unload the wine from the wine chiller and move the wine to a cooler location until power is restored.

When power is restored, the controls automatically are set to the RED WINE setting. If needed, reset the controls to the desired setting.

Operating

Instructions

and Cleaning

Preparing to Move

Unload the wine, then secure the racks by

Be sure the wine chiller stays in an upright

taping them in place to prevent damage.

position during the move.

Replacing the light bulb.

 

Unplug the wine chiller.

 

If the door is locked, unlock it.

 

The light bulb is located behind a light shield in the ceiling of the

Bulb

wine chiller near the front. To remove the light shield, remove the

two screws at the back corners of the shield.

Housing

 

Pull down on the back of the light shield to release the two

 

front tabs.

Care

Step 5:

Remove the light bulb housing by removing the two screws that attach the housing to the ceiling of the wine chiller.

Troubleshooting Tips

Consumer Support

Remove two screws Pull the bulb out of the receptacle. Replace with a 5 watt, 12 volt bulb. This type of bulb is available at most automotive parts stores.

WARNING: Using a bulb rated higher than 5 watts may damage the electronic controls on the wine chiller.

Attach the light bulb housing to the ceiling of the wine chiller with the two screws. Make sure not to pinch or damage any of the wires attached to the housing.

Line up the light shield with the indentation on the ceiling of the wine chiller, then push the front of the shield up until the front tabs clip into place. Replace the screws at the back of the shield.

Plug the wine chiller back in.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Wine Chiller Write the model and serial numbers here Model # Serial #Safety Instructions Care and CleaningConsumer Support CFC DisposalAdapter plugs are not permitted in Canada Instructions OperatingInstalling the wine chiller Safety InstructionsInstallation Instructions Care and CleaningAbout the control and settings When the Wine Chiller is PluggedInstructions Operating Loading the WineOperating Instructions About the controls and settingsSafety Installation Instructions Care and cleaning SafetyInstructions Installation Care and CleaningCleaning Event of a Power FailureReplacing the light bulb Operating InstructionsTroubleshooting Tips Reversing the DoorSafety Installation Instructions Operating Bottom of wine chillerProblem Possible Causes What To Do Before you call for service…Safety Instructions Installation Operating Into wine chiller when Door is opened TemperatureTemperature that Was just set Temperature pads do Wine chiller has odorWine Chiller Warranty Safety Instructions InstallationInstructions Operating Care For The Period Camco Will ReplaceService Telephone Numbers

3504502P327 specifications

The GE 3504502P327 is a robust and versatile gas turbine control system designed for industrial applications. As part of General Electric's extensive lineup of advanced turbine technologies, the 3504502P327 is specifically engineered to optimize efficiency, improve reliability, and enhance operational flexibility in gas turbine operations.

One of the key features of the GE 3504502P327 is its advanced control architecture, which employs digital technology to provide real-time monitoring and control of turbine operations. This allows for precise adjustments to be made to key parameters, ensuring that the turbine operates within optimal performance ranges. The control system is capable of handling various operating conditions, from load transients to steady-state operation, ensuring a seamless response to changes in demand.

The system utilizes sophisticated algorithms and predictive analytics to enhance performance and uptime. By continuously analyzing operational data, the GE 3504502P327 can identify potential issues before they become critical, allowing for proactive maintenance and reducing the likelihood of unplanned outages. This feature is particularly valuable in today’s competitive energy market, where reliability and efficiency are paramount.

Incorporating state-of-the-art communication protocols, the GE 3504502P327 ensures seamless integration with a variety of supervisory control and data acquisition (SCADA) systems. This interoperability enables operators to visualize and control turbine operations from a centralized location, improving decision-making capabilities and streamlining operational workflows.

The GE 3504502P327 also emphasizes user-friendly interfaces. Its intuitive design allows operators to easily navigate and manage the system, reducing the learning curve and improving overall operational effectiveness. Furthermore, the system supports remote monitoring, enabling operators to oversee turbine performance from anywhere, providing flexibility and convenience in management.

In terms of hardware, the GE 3504502P327 is built with high-quality components that enhance durability and reduce maintenance requirements. The robust design ensures that it can withstand the harsh conditions often encountered in industrial environments, contributing to the long-term reliability of the turbine system.

Overall, the GE 3504502P327 represents a cutting-edge solution for operators seeking to maximize their gas turbine's performance. Its combination of advanced control technology, predictive maintenance capabilities, and user-friendly design makes it a preferred choice for industrial gas turbine applications. This system not only enhances the efficiency and reliability of gas turbines but also supports the evolving demands of the energy sector.
Top Page Image Contents