GE 162D9639P003 owner manual Installation Instructions Operating, Consumer Support Troubleshooting

Page 2

Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Installation Instructions Operating

■This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

■Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

■Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Turning the temperature control dial to the OFF position stops cooling but does not shut off power to the refrigerator.

Tips

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Consumer Support Troubleshooting

 

Child entrapment and

 

suffocation are not problems of

 

the past. Junked or abandoned

 

refrigerators are still dangerous…

 

even if they will sit for “just a few

 

days.” If you are getting rid of

 

your old refrigerator, please

 

follow the instructions below to

 

help prevent accidents.

 

Before You Throw Away Your Old

 

Refrigerator or Freezer:

 

■ Take off the doors.

 

■ Leave the shelves in place so

 

that children may not easily

2

climb inside.

CFC Disposal

Your old refrigerator has a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone.

If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant you can be subject to fines and imprisonment under provisions of environmental legislation.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Refrigerators Write the model and serial numbers here Model # Serial #Refrigerator or Freezer Installation Instructions OperatingConsumer Support Troubleshooting CFC DisposalSafety Instructions Operating Instructions USE of Extension CordsTips Installation Instructions Operating Instructions USE of Adapter PlugsHow To Test Temperatures About the controlIce Tray Compartment About the inside of the refrigeratorShelves Door ShelvesCleaning the Inside Care and cleaning RefrigeratorCleaning the Outside Preparing for Vacation Care and cleaning of the refrigeratorDefrosting Preparing to MoveTips Consumer Support Preparing to install the refrigeratorRead these instructions completely and carefully Door Reversal Cubic Foot ModelsTop cover Before you call for service… Problem Possible Causes What To DoMoisture forms on Refrigerator too warmRefrigerator has odor Outside of refrigeratorSafety Instructions What GE Will Not Cover Operating Instructions InstallationGE Will Replace One YearReal Life Design Studio Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

162D9639P003 specifications

The GE 162D9639P003 is a highly regarded component within the realm of electrical and electronic systems, primarily utilized in aviation and aerospace applications. This particular product from General Electric showcases the company’s commitment to providing high-quality solutions for complex engineering challenges.

One of the main features of the GE 162D9639P003 is its robust design, which is crucial for functionality in demanding environments. It is engineered to withstand extreme temperatures, vibration, and operational stresses that are commonly found in aircraft systems. The component adheres to stringent aviation standards, ensuring reliability and safety in flight operations.

The technology behind the GE 162D9639P003 involves advanced materials and manufacturing processes. Utilizing state-of-the-art production techniques, it achieves a balance between lightweight construction and durability. This is particularly important in the aerospace sector, where reducing weight without sacrificing strength can lead to significant improvements in fuel efficiency and overall performance.

Another noteworthy characteristic of this component is its compatibility with various electronic systems. It is designed to easily integrate into existing aircraft architectures, simplifying the installation process for engineers and technicians. This flexibility allows operators to upgrade or replace certain systems without extensive modifications, thereby reducing downtime and associated costs.

Moreover, the GE 162D9639P003 incorporates advanced electronic technologies that enhance functionality. It features improved signal processing capabilities, which ensure precise control and monitoring of system performance. This is vital for maintaining the operational integrity of critical components in fluctuating flight conditions.

Also, the GE 162D9639P003 is manufactured with an emphasis on efficiency and sustainability. As the aviation industry continues to move towards greener technologies, components like this reflect a shift towards reducing environmental impact without compromising on performance.

In summary, the GE 162D9639P003 is a high-performance component that exemplifies the latest advancements in aerospace technology. Its robust design, advanced materials, compatibility with existing systems, and focus on efficiency make it an invaluable addition to any modern aircraft. As the aviation industry evolves, components like the GE 162D9639P003 will play a crucial role in meeting the demands of future air travel.
Top Page Image Contents