Tips Customer Service

■Only certain types of glass, glass/ceramic, earthenware or other glazed containers are suitable for cooktop cooking; others may break because of the sudden change in temperature.

■Never clean the cooktop surface when it is hot. Some cleaners produce noxious fumes and wet cloths could cause steam burns if used on a hot surface.

■Keep an eye on foods being fried at high or medium high heat settings.

■Foods for frying should be as dry as possible. Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan.

■Use little fat for effective shallow or deep-fat frying. Filling the pan too full of fat can cause spillovers when food is added.

■If a combination of oils or fats will be used in frying, stir together before heating, or as fats melt slowly.

■Always heat fat slowly, and watch as it heats.

■Use a deep fat thermometer whenever possible to prevent overheating fat beyond the smoking point.

■Never try to move a pan of hot fat, especially a deep fat fryer. Wait until the fat is cool.

■Do not store flammable materials near the cooktop.

■Keep the hood and grease filters clean to maintain good venting and to avoid grease fires.

■Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any appliance.

■Clean only parts listed in this Owner’s Manual.

■Do not leave paper products, cooking utensils or food on the cooktop when not in use.

■Keep cooktop clean and free of accumulation of grease or spillovers which may ignite.

■Never heat unopened food containers. Pressure buildup may make container burst and cause injury.

■Never leave jars or cans of fat drippings on or near your cooktop.

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

JP626, JP326 specifications

The GE JP326 and JP626 are two advanced gas turbine models designed for efficiency, reliability, and versatility in power generation. Both turbines are a part of GE's portfolio of gas turbine technology, renowned for their ability to operate in various environments, from peaking power plants to base load operations.

The GE JP326 turbine boasts a nominal output of approximately 30 MW, making it a suitable choice for smaller power plants or distributed generation applications. Its design incorporates advanced aerodynamic concepts and materials, contributing to high thermal efficiency and lower emissions. The JP326 utilizes advanced control systems for optimal performance, ensuring precise operation even under varying load conditions. This turbine is particularly recognized for its quick start capabilities, enabling it to respond rapidly to fluctuating energy demands.

On the other hand, the GE JP626 is a larger model, offering a nominal output of around 60 MW. This turbine is ideal for larger power generation facilities and is optimized for combined cycle applications, which further enhances its fuel efficiency. The JP626 features high-pressure ratio technology and advanced cooling techniques for its hot components, which allow for greater operational flexibility and increased durability.

One of the standout characteristics of both turbines is their commitment to sustainability. Engineered to minimize greenhouse gas emissions, they meet today’s stringent environmental regulations while also providing outstanding performance. The implementation of digital controls and monitoring systems enhances reliability and allows for predictive maintenance, ultimately reducing downtime and operational costs.

In summary, both the GE JP326 and JP626 gas turbines exemplify the latest advancements in energy technology. Their features, including high efficiency rates and low emissions, coupled with reliability and quick start capabilities, make them suitable for a wide range of applications. With GE's commitment to innovation, these turbines are positioned to meet the evolving demands of the energy industry, ensuring reliable power generation while promoting environmental sustainability. Their robust engineering and advanced technologies signify GE's leadership in gas turbine manufacturing, making them preferred choices for power producers globally.