Care and cleaning of the cooktop, Safety | GE JP626, JP326 specification

Care and cleaning of the cooktop.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.

Safety

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from all chrome trim. It cannot be removed if it is baked on.

Instructions Operating

Glass Control Panel

The glass control panel on your cooktop has been tempered to withstand sudden temperature changes during cooking. Give it the normal care you would give any glass material.

While it is impact-resistant, avoid scratching it to prevent it from shattering.

If the glass is hot, wipe up spills with a dry cloth or paper towel. When the surface has cooled, wash, rinse and dry it. Alternately, when the glass is cool, spray it with glass or window cleaner. Avoid the use of cleaning powders or harsh abrasives that may scratch the surface.

Instructions

Molded rib

Spring clip

Clear groove

Control Knobs

The control knobs may be removed for easier cleaning.

Before removing the knobs for cleaning, please note that the knobs are in the OFF position. When replacing the knobs, check the OFF position to insure proper placement.

The knob has a groove in each side. The groove on one side has a spring clip. The other groove is clear. Check the inside of the knob and find the molded rib.

Wash knobs in soap and water but do not soak. Avoid getting water down into the knob stem holes.

Replace the knob by fitting the molded rib inside the knob into the clear groove on the stem.

Care and Cleaning

Brushed Chrome Cooktop (on some models)

Clean the brushed chrome top with	To help prevent finger marks after
warm, soapy water or Bon Ami® brand	cleaning, spread a thin film of baby oil on
cleanser. Rinse and immediately dry it	the surface or a chrome protectant may
with a clean, soft cloth. Take care to dry	be used to help reduce spotting or
the surface following the “grain.”	fingerprinting. Wipe away excess oil with
	a clean, soft cloth.

Troubleshooting Tips Customer Service

JP626, JP326 specifications

The GE JP326 and JP626 are two advanced gas turbine models designed for efficiency, reliability, and versatility in power generation. Both turbines are a part of GE's portfolio of gas turbine technology, renowned for their ability to operate in various environments, from peaking power plants to base load operations.

The GE JP326 turbine boasts a nominal output of approximately 30 MW, making it a suitable choice for smaller power plants or distributed generation applications. Its design incorporates advanced aerodynamic concepts and materials, contributing to high thermal efficiency and lower emissions. The JP326 utilizes advanced control systems for optimal performance, ensuring precise operation even under varying load conditions. This turbine is particularly recognized for its quick start capabilities, enabling it to respond rapidly to fluctuating energy demands.

On the other hand, the GE JP626 is a larger model, offering a nominal output of around 60 MW. This turbine is ideal for larger power generation facilities and is optimized for combined cycle applications, which further enhances its fuel efficiency. The JP626 features high-pressure ratio technology and advanced cooling techniques for its hot components, which allow for greater operational flexibility and increased durability.

One of the standout characteristics of both turbines is their commitment to sustainability. Engineered to minimize greenhouse gas emissions, they meet today’s stringent environmental regulations while also providing outstanding performance. The implementation of digital controls and monitoring systems enhances reliability and allows for predictive maintenance, ultimately reducing downtime and operational costs.

In summary, both the GE JP326 and JP626 gas turbines exemplify the latest advancements in energy technology. Their features, including high efficiency rates and low emissions, coupled with reliability and quick start capabilities, make them suitable for a wide range of applications. With GE's commitment to innovation, these turbines are positioned to meet the evolving demands of the energy industry, ensuring reliable power generation while promoting environmental sustainability. Their robust engineering and advanced technologies signify GE's leadership in gas turbine manufacturing, making them preferred choices for power producers globally.